Iwatsu Omega-Phone 924 Technical Manual page 144

Omega-Phone 924 Technical Manual
Privacy
All calls in the system are considered Private. In some cases it is desirable to allow
other extensions to join in on an existing CO Line conversation. Therefore, each CO
Line can select between Privacy and Privacy Release (MBC 02-LN-16). Care should
be taken when disabling Privacy because some automatic features, such as Last
Number Redial, System and extension Speed Dial, and Saved Number Redial can
accidentally dial over the existing conversation.
Related Features
CO Line Calling
Monitor
Intercom Calling
Monitor COS
Intrusion
Conditions
1. Monitor can be used to listen-in on existing conversations.
2. Intrusion can be used to Barge-in on existing conversations.
3. If Intrusion is set to Y (yes) another extension will be able to enter in an monitor
another extension's conversation.
Private To (Private Line)
The Private To feature allows one or more CO Lines to be programmed for access by
only one extension. Once programmed as a Private To, no other extensions will be
able to access the CO Line for either inbound or outbound calls. However, once the
call is answered it can be transferred to another extension. Any extension with a key
programmed with that Line will show busy when it is in use and access to the line will
be denied. This restricted access includes calls on hold, incoming, and outgoing calls.
Related Features
Conditions
1. Incoming calls signaling on a private CO Line will only ring its associated exten-
sion regardless of whether the CO Line ring assignment is allowed in program-
ming.
2. Private To programming will override the CO Line - Answer Position and CO
Line Receive Assignments.
3. CO Lines designated as Private To follow call forward modes as set by the Private
To extension.
140
Programming
Privacy Release 2-LN-16
Programming
CO Line - Private To 2-LN-08