Iwatsu Omega-Phone 924 Technical Manual page 30

Omega-Phone 924 Technical Manual
OM-VML Voice Processing System Installation
1. After Installing the OM-OPT Option Module. (If not installing an Option Module,
use the special spacers that are included with the OM-VML Card). The spacers
are placed between the stand-offs on the motherboard and the standoffs used with
the OM-VML Card. These spacers are required to match the thickness of the OM-
OPT module when the OM-OPT module is not installed.
2. Insert the brass-colored stand-off posts, which are supplied with the OM-VML
Card.
3. Remove the plastic cutouts from inside the KSU located next to the Ethernet and
IOIOI vmail markings.
4. Insert the OM-VML Module and plug the ribbon cable into the pin connector
socket labeled: FOR VM/B.
5. Place the previously removed screws into the top of the stand-offs to secure the
Module.
6. Replace the cover and power up the system.
26