Iwatsu Omega-Phone 924 Technical Manual page 107

Chapter 6
Busy Ring Allow / Deny
Feature #2
This feature allows the extension user the ability to turn on or off muted ringing of
incoming or transferred calls when the user is in a busy status. When a CO Line is
ringing or transferred to a busy extension and Busy Ring is allowed, the user will hear
muted ringing. When a CO Line is ringing or transferred to a busy extension and Busy
Ring is denied, the user will hear a single burst of warning tone. All programmed call
forwarding and recall conditions apply in either Busy Ring condition.
Associated Features
Transfer
Transfer Beep Enable (Feature 56)
Conditions:
1. This feature will toggle on/toggle off when it is programmed under a programma-
ble key on the Digital Speakerphone.
2. The LED will not light when the feature is enabled, or disabled.
Call Attendant (Operator)
0
The extension that is programmed as the Attendant may receive multiple internal calls
via the programmed Operator Code "0".
Associated Features
N/A
Conditions:
1. The Operator Code (0) is in addition to the default assigned two-digit intercom
number for the extension.
2. The attendant two-digit extension number can be assigned to any feature key.
Associated Programming
Associated Programming
Resource Attendant 4-03
Resource Alternate Attendant 4-04
Telephone Operations
103