Iwatsu Omega-Phone 924 Technical Manual page 131

Chapter 6
Hold Reminder Time (Hold Recall)
When the programmable Hold Reminder timer is exceeded, a single ring tone is
heard at the extension that placed the call on hold. This reminder, will be repeated
each time the timer expires.
Related Features
Hold System/Exclusive
Conditions
1. Hold Reminder applies to both intercom and CO Line calls.
2. Hold Reminder applies to CO Line calls that are on System Hold or Exclusive
Hold.
Holding Call Answer – Select
Hold
• Holding Call Answer allows a user to place and retrieve calls on and off hold by
pressing the Hold key. When several calls are holding at an extension, Holding
Call Answer will access the CO line that has been holding for the longest period
of time while placing the current call on hold.
• Holding Call Answer works for all CO Lines regardless of the extension's CO
Line key programming. It is possible to retrieve calls that do not appear on a key
at an extension via Holding Call Answer.
• Single Line Extensions will use *6 to answer a call placed on hold at their
extension and *7 to answer a call placed on hold at a different extension.
Related Features
CO Line Assignment
Hold - Exclusive
Hold – System (Common)
Conditions
1. Holding Call Answer will also operate for intercom calls placed on hold.
2. If the person on Hold hangs up, the system will automatically release the held CO
Line.
Hot Key Enable / Disable
Feature #6
At default, all digital telephones have the Hot Key Pad set to enabled. This allows the
user to dial an extension or accessing a CO Line by dialing the number without lifting
the handset or pressing the speaker key. If this feature is disabled, the speaker key or
handset must be used to activate the dial pad.
Related Features
All "dial-access" features
Intercom calling
Programming
Call Handling Remind Time 3-06
Programming
Call Handling
Recall Time 3-13
Ex_Hold Time 3-03
Programming
Telephone Operations
127