Feature Code Operation - Iwatsu Omega-Phone 924 Technical Manual

Omega-Phone 924 Technical Manual

Feature Code Operation

Accessing Specific CO Lines
(x)
Feature 0
Accessing Individual CO Lines may be accessed directly by pressing the Feature key
followed by 0(x), where (x) = the CO Line 1 - 9. This allows both Single Line and
Digital Key telephones the ability to access specific CO Lines rather than dialing the
line group code.
Conditions:
1. The CO Line hardware must be installed or the CO Line will not be available.
2. The CO Line must be connected to the telephone company facility or error tone
will be heard.
Account Code (Password Dial)
Feature 4
Account Codes can be forced, which requires an extension to enter the account code
before placing a CO Line call, or unforced, allowing the user to decide if/when they
will enter the account code. All account codes are verified against the Password Dial
Table (MBC - 5-02) in Restriction.
Answering Machine Emulation
Feature 64
Answering Machine Emulation requires the voice mail (OM-VML) System. This
feature 'Mimics' the call screening feature of a simple analog answering machine.
Within a specified time after a call is answered by an extension user's Voice Mailbox,
that user can monitor/screen callers as they leave a message.
The extension user will receive a warning tone that indicates when a caller has been
answered by their voice mailbox. They then have the option to monitor the caller or
ignore the alert and allow the caller to leave a message. Once the user has selected to
monitor the caller, they then have the option to leave the caller undisturbed (leaving a
message) or to retrieve the caller from the voice mail box and be connected to the
caller for a live conversation.
Associated Features
Voice Mail
96
Associated Programming
Extension Predefined Forward 1-EN-21
Call Handling Voice Mail Monitor Time 3-22