Iwatsu Omega-Phone 924 Technical Manual page 108

Omega-Phone 924 Technical Manual
Call Back – Extension
or Press cbck
Feature 91
This feature allows the user to queue an extension, which is busy, in Do Not Disturb
(DND) or idle. When a user sends a Call Back to a busy extension, the Call Back
process will begin when the busy extension hangs up. When Call Back is sent to an
idle extension, the Call Back process will begin once the user performs an operation at
that extension and then hangs up.
When the Call Back process begins the user will hear bursts of tone signaling them to
pick up the handset or press the LCD soft key under reply. Then the queued extension
begins ringing.
Associated Features
Intercom Mode Selection (F95)
Forced Intercom Tone Ring (*)
Programmable Key (F#3)
Interactive Soft Keys
Voice Announce / Hands free Reply F98
Conditions:
1. If the user presses [del] during the Call Back Alert ringing, the Call Back is can-
celled and the display will read CBCK DELETE. The extension returns to an
idle state.
2. To invoke a Call Back at an extension that is in the Voice Announce mode, the
user must press * to Force Tone Ringing.
3. When a Call Back alert is not answered at the extension that invoked the Call
Back, the display message "CBCK TO EXT" be displayed until either they
[reply] or [del].
4. The Call Back process begins when both the user's extension and the called
party's extension are idle, on-hook.
Call Duration Timer (Incoming/Outgoing)
This feature is enabled in Database Programming on a per extension basis. When
enabled, any outgoing CO Line call is automatically timed. When the system
Warning Tone time expires the call is released. This feature is normally used to
control outgoing call traffic.
Associated Features
Warning Tone 1-EN-08
Warning Time 3-12
Conditions
1. After the Call Duration Time has expired, the Call Timer begins.
104
Associated Programming
Associated Programming
Outgoing Drop 1-EN-09
Incoming Drop 1-EN-10