Iwatsu Omega-Phone 924 Technical Manual page 142

Omega-Phone 924 Technical Manual
Page (Meet Me)
Feature 59
Meet me page allows the user to locate a person that is away from their desk or have
no office location. Once paged, the party can answer the page, using any telephone in
the system, by entering the Meet Me Feature code. Once the code is entered, the
system creates a private intercom call and releases the page port.
Related Features
Meet Me Page (F59)
Paging Allow (F#9)
Conditions
1. A page may be answered at any telephone, by dialing Meet Me Page code, even if
the page announcement is not heard over the telephone speaker.
2. The page may be a zone page or a system wide all page.
3. The Meet Me Page code can be programmed on any available programmable key.
Pause / Pause Insertion
Feature 70
The Pause/Pause Insertion feature places a deliberate delay in dialing when placing an
outgoing CO Line call from a stored number. Pause is useful in allowing access to
special services where a delay is required. When entering a pause it will appear as a P
on the telephone display. A pause can be inserted in a number stored as an extension
Speed Dial number or in a System (Common) Speed Dial bin. In addition, a pause
should be inserted at the beginning of any External Call Forward feature.
Related Features
Automatic Busy Redial
Last Number Redial
Saved Number Redial
Speed Dial (ABBR)
Extension
System
Conditions
1. A pause occupies one digit position when stored in speed dial.
138
Programming
Extension - Group 1-EN-07
Programming
Call Handling - Pause Time 3-07
Resource - System Speed (ABBR) 4-12