Headset Jack - Iwatsu Omega-Phone 924 Technical Manual

Omega-Phone 924 Technical Manual

Headset Jack

Feature 9#
The headset jack on the OM-KTD30 Digital Station is a standard 2.5 mm jack, which
will accept industry-standard headsets.
A headset connected to the headset jack operates as an integral component of the
digital speakerphone.
Associated Features
N/A
Conditions
1. The Headset Jack can be found next to the Handset Cord jack.
Hold (System / Exclusive Hold)
Extension users can place any call on hold, by pressing the hold key. If the line place
on hold is a CO Line, the line key will flash slowly at the phone that placed it on hold.
On all other phones this line key will be lit solid.
I – Hold Indication refers to the color difference of the LED's. When an extension
places a CO Line on Hold, I – Hold identifies that the call is holding for that extension
with a flashing LED. A CO Line placed on hold by a different extension will change
colors and be lit solid.
Related Features
Call Transfer
Hold Reminder
Conditions
1. When the conference initiator presses Hold, the conference parties will be placed
on Exclusive Hold. This feature is used when adding conference participates. The
LED will flash green at the conference initiator's extension, and red everywhere
else.
2. Calls placed on Hold will hear Music-on-Hold, only if an external music source is
connected.
3. Calls placed on Exclusive (private) Hold, which have exceeded the programmed
Exclusive Hold time, will be automatically converted to System Hold.
4. There is a distinctive slow flash rate for a CO Line that is on System Hold.
5. There is a distinctive rapid flash rate for a CO Line that is on Exclusive Hold.
126
Associated Programming
N/A
Programming
Call Handling
Recall 3-13
Remind Time 3-06