Chrysler 1998 Voyager Service Manual page 474

8L - 22 LAMPS
REMOVAL AND INSTALLATION (Continued)
(3) Separate housing from trim panel.
(4) Disengage wire connector from lamp.
(5) Separate lamp housing from vehicle.
Fig. 14 Door Courtesy Lamp Housing
INSTALLATION
(1) Position lamp housing to vehicle.
(2) Engage wire connector to lamp.
(3) Slide tab on forward edge of housing behind
trim panel.
(4) Snap rear edge of housing into trim panel.
FRONT DOOR COURTESY LAMP BULB
REMOVAL
(1) Using a small, flat bladed pry tool, pry rear
edge of courtesy lamp lens from courtesy lamp (Fig.
15).
(2) Remove lens from lamp.
(3) Squeeze brass lamp bulb contacts together gen-
tly.
(4) Disengage bulb from lamp contacts (Fig. 16).
(5) Remove bulb from lamp.
Fig. 15 Door Courtesy Lamp Lens
Fig. 16 Door Courtesy Lamp Bulb
NS