Chrysler 1998 Voyager Service Manual page 369

NS
REMOVAL AND INSTALLATION (Continued)
Fig. 49 Outlet Base Removal
Fig. 50 Tool For Outlet Removal
Fig. 48 Message Center Lamp Location
umn bezel to the cluster bezel (Fig. 51).
cle.
to the cluster bezel.
nect the wire pigtail connector from the traction con-
trol switch.
and engage clips to the cluster bezel. If equipped
INSTRUMENT PANEL AND SYSTEMS
(2) Remove the screws holding over steering col-
Fig. 51 Over Steering Column Bezel
(3) Remove over steering column bezel from vehi-
(4) Disconnect the clips holding over column bezel
(5) If equipped with traction control switch, discon-
(6) Remove the over steering column bezel.
INSTALLATION
(1) Place the over steering column bezel in position
8E - 33