Chrysler 1998 Voyager Service Manual page 445

NS
REMOVAL AND INSTALLATION (Continued)
(6) Disconnect front washer hose at front wiper
unit in the engine compartment (Fig. 4). The front
hose will be removed with the bottle.
Fig. 4 Front Washer Hose
(7) Disconnect hose from rear washer pump nipple
(Fig. 5).
(8) Allow washer bottle to drain.
(9) Remove screws holding washer bottle to front
fender support and remove bottle.
INSTALLATION
For installation, reverse the above procedure.
WINDSHIELD WIPER BLADE
REMOVAL
(1) Lift the wiper arm away from windshield.
(2) Disengage the release tab holding the wiper
blade to the wiper arm and remove the wiper blade
from the wiper arm (Fig. 6).
(3) Remove the wiper blade from the wiper arm.
INSTALLATION
For installation, reverse the above procedure.
Fig. 5 Rear Washer Hose Routing
WINDSHIELD WIPERS AND WASHERS
Fig. 6 Windshield Wiper Blade
8K - 5