Chrysler 1998 Voyager Service Manual page 410

8F - 8 AUDIO SYSTEMS
REMOVAL AND INSTALLATION (Continued)
Fig. 11 Antenna Cap Nut
RADIO/TAPE/CD PLAYER
REMOVAL
(1) Remove HVAC switch bezel, refer to Group 8E,
Instrument Panel and Systems for proper procedure.
(2) Remove screws holding radio to instrument
panel (Fig. 12).
Fig. 12 Radio
(3) Pull radio rearward to gain access to back of
radio (Fig. 13).
(4) Remove bolt holding ground strap to back of
radio.
(5) Disconnect antenna cable from back of radio.
(6) Disconnect the wire connectors from back of
radio.
(7) Remove radio from vehicle.
INSTALLATION
For installation, reverse the above procedure.
Fig. 13 Radio Connectors
INSTRUMENT PANEL SPEAKER
INSTALLATION
(1) Remove instrument panel top cover.
(2) Remove screws holding speaker to instrument
panel and remove speaker (Fig. 14) or (Fig. 15).
Fig. 14 Left Instrument Panel Speaker
(3) Remove anti rocking finger screw.
(4) Disconnect wire connector from speaker.
(5) Remove speaker.
INSTALLATION
For installation, reverse the above procedure.
NS