Chrysler Voyager 2023 Owner's Manual
  1. Manuals
  2. Brands
  3. Chrysler Manuals
  4. Automobile
  5. Voyager 2023
  6. Owner's manual

Chrysler Voyager 2023 Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

2023
VOYAGER
O W N E R ' S M A N U A L

Advertisement

Table of Contents
loading

Related Manuals for Chrysler Voyager 2023

Summary of Contents for Chrysler Voyager 2023

  • Page 1 2023 VOYAGER O W N E R ’ S M A N U A L...
  • Page 2 ROADSIDE ASSISTANCE HOURS, DAYS A WEEK AT YOUR SERVICE. 1-800-521-2779 CALL OR VISIT CHRYSLER.RSAHELP.COM (USA) 1-800-363-4869 CALL OR VISIT FCA.ROADSIDEAID.COM (CANADA) SERVICES: Flat Tire Service, Out Of Gas/Fuel Delivery, Battery Jump Assistance, Lockout Service and Towing Service Please see the Customer Assistance chapter in this Owner’s Manual for further information.

  • Page 3: Table Of Contents

    TABLE OF CONTENTS INTRODUCTION ..........................6 GETTING TO KNOW YOUR VEHICLE ................. 10 GETTING TO KNOW YOUR INSTRUMENT PANEL ............59 STARTING AND OPERATING ....................75 MULTIMEDIA ..........................104 SAFETY ............................121 IN CASE OF EMERGENCY .....................170 SERVICING AND MAINTENANCE ..................192 TECHNICAL SPECIFICATIONS ....................
  • Page 4 INTRODUCTION STEERING WHEEL .............. 22 Lights-On Reminder............. 41 Tilt/Telescoping Steering Column ......22 Turn Signals ..............41 SYMBOLS KEY ............... 7 Heated Steering Wheel — If Equipped......22 Lane Change Assist — If Equipped ......41 VEHICLE MODIFICATIONS/ALTERATIONS ......7 Battery Protection ............41 SEATS ...................
  • Page 5 GETTING TO KNOW YOUR STARTING AND OPERATING PARKSENSE REAR PARK ASSIST — IF EQUIPPED ..............87 INSTRUMENT PANEL STARTING THE ENGINE............75 ParkSense Sensors ............. 88 Normal Starting ............75 BASE INSTRUMENT CLUSTER ...........59 ParkSense Warning Display........88 AutoPark...............75 Base Instrument Cluster Descriptions....... 60 ParkSense Display ............
  • Page 6 MULTIMEDIA SAFETY TIPS ..............167 REFUELING IN EMERGENCY – IF EQUIPPED ....187 Transporting Passengers ......... 167 IF YOUR ENGINE OVERHEATS.........187 UCONNECT SYSTEMS ............. 104 Transporting Pets ............ 167 MANUAL PARK RELEASE ..........188 CYBERSECURITY ............. 104 Connected Vehicles ..........167 FREEING A STUCK VEHICLE ...........189 UCONNECT SETTINGS............
  • Page 7 CUSTOMER ASSISTANCE Exhaust System ............203 INTERIORS ............... 233 Cooling System............204 Seats And Fabric Parts..........233 SUGGESTIONS FOR OBTAINING SERVICE FOR YOUR Brake System ............206 Plastic And Coated Parts.......... 234 VEHICLE ................240 Automatic Transmission .......... 207 Leather Surfaces ............234 Prepare For The Appointment ........240 Fuses .................

  • Page 8: Introduction

    FCA US LLC aims at a constant improvement of the vehicles produced. For this reason, it reserves the right to make changes to the model described for technical and/or commercial reasons. For further information, contact an authorized dealer. When it comes to service, remember that authorized dealers know your Chrysler vehicle best, have factory-trained technicians and genuine Mopar® parts, and care about your satisfaction.

  • Page 9: Symbols Key

    SYMBOLS KEY SYMBOL GLOSSARY These statements apply to operating procedures that Some car components have colored labels with symbols indicating precautions to be WARNING! observed when using this component. It is important to follow all warnings when operating could result in a collision, bodily injury and/or death. your vehicle.
  • Page 10 Yellow Warning Lights Red Warning Lights Anti-Lock Brake System (ABS) Warning Light Engine Coolant Temperature Warning Light page 70 page 69 Ú Ú Electric Park Brake Warning Light Hood Open Warning Light page 70 Ú page 69 Ú Electronic Stability Control (ESC) Active Warning Light Liftgate Open Warning Light page 70 page 69...
  • Page 11 Yellow Warning Lights Green Indicator Lights Service Stop/Start System Warning Light Parking/Headlights On Indicator Light page 71 page 72 Ú Ú Tire Pressure Monitoring System (TPMS) Warning Light Stop/Start Active Indicator Light page 71 page 72 Ú Ú Turn Signal Indicator Lights Yellow Indicator Lights page 72 Ú...

  • Page 12: Getting To Know Your Vehicle

    GETTING TO KNOW YOUR VEHICLE KEYS To Lock/Unlock The Doors And Liftgate Push and release the unlock button on the key fob once to unlock the driver’s front door and sliding door or twice within five seconds to unlock all doors and the liftgate. Your vehicle is equipped with a key fob which supports Passive Push and release the lock button on the key fob to lock all Entry, Remote Keyless Entry (RKE), Keyless Enter ‘n Go™...
  • Page 13 GETTING TO KNOW YOUR VEHICLE Key Left Vehicle Feature  Perchlorate Material — special handling may apply. Remove the battery by sliding the battery rearward in See www.dtsc.ca.gov/hazardouswaste/perchlorate for its pocket until the battery lifts up. Remove the If a valid key fob is no longer detected inside the vehicle further information.

  • Page 14: Sentry Key

    GETTING TO KNOW YOUR VEHICLE SENTRY KEY Programming And Requesting Additional CAUTION! Key Fobs The Sentry Key Immobilizer system prevents unauthorized The Sentry Key Immobilizer system is not compatible Programming the key fob may be performed by an vehicle operation by disabling the engine. The system with some aftermarket Remote Start systems.
  • Page 15 GETTING TO KNOW YOUR VEHICLE START WARNING!  The engine will start (when foot is on the brake pedal)  Allowing children to be in a vehicle unattended is The engine only runs in the ON/RUN ignition position or dangerous for a number of reasons. A child or others from a Remote Start request.

  • Page 16: Remote Start - If Equipped

    GETTING TO KNOW YOUR VEHICLE REMOTE START — IF EQUIPPED Pushing the Remote Start button a third time shuts the  Vehicle Security system indicator flashing engine off.  Ignition in OFF position This system uses the key fob to start the engine To drive the vehicle, push the unlock button and place the ...

  • Page 17: Remote Start Front Defrost Activation

    GETTING TO KNOW YOUR VEHICLE NOTE: comfort menu screen. The vehicle will adjust the climate EMOTE TART INDSHIELD IPER control settings depending on the outside ambient  For vehicles equipped with the Keyless Enter ‘n Go™ — — I CTIVATION QUIPPED temperature.

  • Page 18: Vehicle Security System - If Equipped

    GETTING TO KNOW YOUR VEHICLE VEHICLE SECURITY SYSTEM — IF EQUIPPED the vehicle or not. If you remain in the vehicle and open a ISARM YSTEM door, the alarm will sound. If this occurs, disarm the The Vehicle Security system can be disarmed using any of Vehicle Security system.

  • Page 19: Power Door Locks - If Equipped

    GETTING TO KNOW YOUR VEHICLE — I NOTE: OWER OCKS QUIPPED The manual door locks will not lock or unlock the liftgate. A power door lock switch is on each front door trim panel. WARNING! Use this switch to lock or unlock the doors. ...

  • Page 20: Keyless Enter N G O Passive Entry

    GETTING TO KNOW YOUR VEHICLE ‘ ™ —  If the vehicle is unlocked by Passive Entry and no door  All doors will unlock when the front passenger door EYLESS NTER is opened within 60 seconds, the vehicle will relock and handle is grabbed regardless of the driver’s door ASSIVE NTRY...

  • Page 21: Automatic Unlock Doors On Exit - If Equipped

    GETTING TO KNOW YOUR VEHICLE  There is a valid Passive Entry key fob outside the vehicle and within 5 ft (1.5 m) of either Passive Entry door handle. NOTE: On the third attempt ALL doors will lock and the key fob can be locked in the vehicle.

  • Page 22: Manual Sliding Side Door

    GETTING TO KNOW YOUR VEHICLE To keep your door operating properly, observe the Push the button on the key fob twice within ANUAL LIDING following guidelines: five seconds to open, close, or reverse a power The sliding door may be opened from the inside or the sliding door.

  • Page 23: Child Protection Door Lock System - Rear Doors

    GETTING TO KNOW YOUR VEHICLE To operate the sliding door manually with the handles or WARNING! to avoid unintentional operation of the power sliding doors from the rear seats, push the power sliding door power off  Personal injury or cargo damage may occur if caught button, located in the overhead console, to remove power in the path of the sliding door.

  • Page 24: Steering Wheel

    GETTING TO KNOW YOUR VEHICLE STEERING WHEEL  To avoid unintentional operation of the power sliding WARNING! door from the rear seats, push the Sliding Door Power Off button, located in the overhead console. When the Do not adjust the steering column while driving. ELESCOPING TEERING OLUMN...

  • Page 25: Seats

    GETTING TO KNOW YOUR VEHICLE ANUAL DJUSTMENT WARNING! ) — I RONT EATS QUIPPED  Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, WARNING! spinal cord injury, medication, alcohol use, exhaus- tion, or other physical conditions must exercise care ...

  • Page 26: Manual Adjustment

    GETTING TO KNOW YOUR VEHICLE Manual Seat Height Adjustment — WARNING! WARNING! If Equipped  Adjusting a seat while driving may be dangerous.  Do not ride with the seatback reclined so that the The seat height can be raised or lowered by using a lever, Moving a seat while driving could result in loss of shoulder belt is no longer resting against your chest.
  • Page 27 GETTING TO KNOW YOUR VEHICLE WARNING! WARNING! Do not ride with the seatback reclined so that the If not properly latched, the seat could become loose. shoulder belt is no longer resting against your chest. Personal injuries could result. In a collision you could slide under the seat belt, which could result in serious injury or death.
  • Page 28 GETTING TO KNOW YOUR VEHICLE NOTE: Slide the lever upwards, or if equipped, pull the handle forward, to unlock the seatback.  The seatback may lock into the fold-flat position. Use the recline lever to unlock the seatback.  If equipped with Stow ‘n Go seating: when returning the seat to the original position, the headrest must be folded back to the original position.
  • Page 29 GETTING TO KNOW YOUR VEHICLE Easy Entry — With The Seat Folded Flat Exit For Third Row Passengers — Stow ‘n Go Seats Only The seats can be folded and tilted for more accessibility If the second row is equipped with Stow ‘n Go, third row for passengers to enter and exit the third row.
  • Page 30 GETTING TO KNOW YOUR VEHICLE To remove the seat, pull the release strap to release Reinstalling Seat Tilt seat rearward to lock the seat back into its original the rear latches. position. To reinstall the seat: With the seat tilted forward, Tilt the back of the seat to the upward position.
  • Page 31 GETTING TO KNOW YOUR VEHICLE Lower the center head restraint down to the Pulling strap “2” releases the seatback to return to its seatback by pushing the button on the guide and full upright position. pushing the head restraint down. Pull release strap marked “1”...
  • Page 32 GETTING TO KNOW YOUR VEHICLE Stow 'n Go Seating  For information on storage bin function with the Remove the plastic storage bin from the storage area, and store in a safe location. seats rearward page 50. Ú On vehicles equipped with Stow 'n Go seating, the second Fold the armrest upward and stow the seat by Pull the latch located near the second row seat to and third row seats can be folded into the floor for...
  • Page 33 GETTING TO KNOW YOUR VEHICLE TO UNSTOW SECOND ROW SEATS Close the floor by pulling the floor panel backwards by Readjust the front seat as needed, and replace the the bottom corner edge of the panel. floor mat (if equipped). To unstow the seat from the floor, move the front seat all the way forward using the manual seat adjustment bar.
  • Page 34 GETTING TO KNOW YOUR VEHICLE Pull the latch located near the second row seat to Pull the strap located on the seat and pull the seat open the floor panel. out of the storage area. Push the seat rearward making sure that it locks into the floor. Fold the seatback into the upright position and pull the headrest up.

  • Page 35: Power Adjustment (Front Seats) - If Equipped

    GETTING TO KNOW YOUR VEHICLE WARNING! WARNING!  In a collision, you or others in your vehicle could be  Do not ride with the seatback reclined so that the injured if seats are not properly latched to their floor shoulder belt is no longer resting against your chest.

  • Page 36: Heated Seats

    GETTING TO KNOW YOUR VEHICLE Tilting The Seat Up Or Down Power Lumbar — If Equipped  Press the heated seat button once to turn the HI setting on.  Press the heated seat button a second time to turn the The angle of the seat cushion can be adjusted in two LO setting on.

  • Page 37: Head Restraints

    GETTING TO KNOW YOUR VEHICLE desired position. To adjust the head restraint rearward, ESTRAINTS continue pulling forward on the top of the head restraint to Head restraints are designed to reduce the risk of injury by the farthest forward position and the head restraint will restricting head movement in the event of a rear impact.
  • Page 38 GETTING TO KNOW YOUR VEHICLE remove the head restraint. To reinstall the head restraint, NOTE: WARNING! put the head restraint posts into the holes and push To remove the center head restraint, raise it as far as it downward. Then, adjust the head restraint to the can go.

  • Page 39: Uconnect Voice Recognition

    GETTING TO KNOW YOUR VEHICLE UCONNECT VOICE RECOGNITION — TARTED IF EQUIPPED VR button is used to activate/deactivate your Voice Recognition system. NTRODUCING OICE ECOGNITION Helpful hints for using Voice Recognition:  Reduce background noise. Wind noise and passenger Start using Uconnect Voice Recognition (VR) with these conversations are examples of noise that may impact helpful quick tips.

  • Page 40: Mirrors

    GETTING TO KNOW YOUR VEHICLE MIRRORS — LLUMINATED ANITY IRRORS ONVERSATION IRROR QUIPPED Located in the overhead console there is a conversation NSIDE EARVIEW IRROR mirror to view all the passengers in the vehicle. Push the To access an illuminated vanity mirror, flip down one of the panel to release the drop down mirror.

  • Page 41: Power Mirrors - If Equipped

    GETTING TO KNOW YOUR VEHICLE — I OWER IRRORS QUIPPED UTSIDE IRRORS OLDING EATURE EADLIGHT WITCH The power mirror controls are located on the driver-side All outside mirrors are hinged and may be moved either The headlight switch is located on the left side of the door trim panel.

  • Page 42: Daytime Running Lights (Drls) - If Equipped

    GETTING TO KNOW YOUR VEHICLE NOTE: WITCH For vehicles sold in Canada, rotate the headlight switch Push the multifunction lever toward the instrument panel clockwise from the parking light and instrument panel light position to the first detent to turn on the headlights to switch the headlights to high beams.

  • Page 43: Headlight Time Delay - If Equipped

    GETTING TO KNOW YOUR VEHICLE INTERIOR LIGHTS — I NOTE: EADLIGHT ELAY QUIPPED If either light remains on and does not flash, or there is a This feature provides the safety of headlight illumination very fast flash rate, check for a defective outside light NTERIOR OURTESY IGHTS...

  • Page 44: Windshield Wiper And Washers

    GETTING TO KNOW YOUR VEHICLE Rear Courtesy/Reading Lights — At the top detent of the instrument panel dimmer, all the interior lights will illuminate. At the bottom most setting If Equipped (extreme bottom) interior lights are turned off (dome off), Located above the rear passengers are courtesy/reading and the cluster, radio and instrument lighting go to their lights.

  • Page 45: Rain Sensing Wipers - If Equipped

    GETTING TO KNOW YOUR VEHICLE — I Intermittent Wipers ENSING IPERS QUIPPED Use the intermittent wiper when weather conditions make This feature senses rain or snowfall on the windshield and a single wiping cycle with a variable pause between cycles automatically activates the wipers.

  • Page 46: Rear Wiper And Washer

    GETTING TO KNOW YOUR VEHICLE CLIMATE CONTROLS MAX A/C Button  Neutral Wipe Inhibit — The Rain Sensing feature will not operate when the ignition is ON, when the transmission gear Press and release the MAX A/C button to selector is in the NEUTRAL position and the vehicle speed is ANUAL LIMATE ONTROL...
  • Page 47 GETTING TO KNOW YOUR VEHICLE Recirculation Button Front Temperature Control mode with maximum temperature settings for best windshield and side window defrosting and defogging. Press and release this button to change the system These buttons provide the driver and passenger with Performing this function will cause the Automatic between recirculation mode and outside air mode.
  • Page 48 GETTING TO KNOW YOUR VEHICLE Blower Control Controlling The Rear Climate Controls direction. There is a shut-off wheel located below the air vanes to shut off or adjust the amount of airflow from From The Front MTC Display/Touchscreen Blower Control is used to regulate the amount these outlets.
  • Page 49 GETTING TO KNOW YOUR VEHICLE REAR TEMPERATURE CONTROL PANEL MODE Rear Manual Temperature Control (MTC) These buttons provide the rear passengers with Press this button on the touchscreen to change The rear Manual Temperature Control (MTC) system has independent temperature control. the air distribution mode to Panel Mode.

  • Page 50: Climate Voice Commands

    GETTING TO KNOW YOUR VEHICLE REAR TEMPERATURE CONTROL BI-LEVEL MODE Did you know: Voice Command for Climate may only be used to adjust the interior temperature of your vehicle. Push the up arrow button to raise the Air comes from both the headliner outlets and Voice Command will not work to adjust the heated seats temperature.

  • Page 51: Interior Storage And Equipment

    GETTING TO KNOW YOUR VEHICLE Outside Air Intake WEATHER CONTROL SETTINGS Make sure the air intake, located directly in front of the Turn (A/C) on and set the windshield, is free of obstructions, such as leaves. Leaves Warm Weather mode control to (Panel Mode).
  • Page 52 GETTING TO KNOW YOUR VEHICLE CAUTION! The storage drawer must be closed while driving. If left open during a collision, additional damage may occur to property or the drawer mechanism. Front Seatback Storage — If Equipped The front seatbacks have a storage pocket on some models.
  • Page 53 GETTING TO KNOW YOUR VEHICLE NOTE: CAUTION! CAUTION!  Push the lock rod inward for the locked position. The storage bin cover must lie flat and be latched to The storage bin cover must lie flat and be latched to ...

  • Page 54: Usb/Aux Control

    GETTING TO KNOW YOUR VEHICLE USB/AUX C There are multiple USB “Charge Only” ports in this vehicle. NOTE: ONTROL The USB “Charge Only” ports will recharge battery  On the back of the front row seats (if equipped). There are numerous USB ports located throughout the operated USB devices when connected.
  • Page 55 GETTING TO KNOW YOUR VEHICLE NOTE: In addition to the front power outlet, there may also be a power outlet located in the rear cargo area. All accessories connected to the battery powered outlets should be removed or turned off when the vehicle is not in The rear power outlet is located in the right rear cargo use to protect the battery against discharge.

  • Page 56: Windows

    GETTING TO KNOW YOUR VEHICLE The window switches will operate only when the ignition is CAUTION! in the ON/RUN or ACC position and during power accessory delay.  Many accessories that can be plugged in draw power from the vehicle's battery, even when not in use NOTE: (i.e., cellular phones, etc.).

  • Page 57: Automatic Window Features

    GETTING TO KNOW YOUR VEHICLE Auto-Up Feature With Anti-Pinch Protection ESET Lift the window switch fully upward to the second detent, To reactivate the Auto Up feature, perform the following release, and the window will go up automatically. steps after vehicle power is restored: To stop the window from going all the way up during the Pull the window control up to close the window Auto-Up operation, push down on the switch briefly.

  • Page 58: Hood

    GETTING TO KNOW YOUR VEHICLE HOOD WARNING! Be sure the hood is fully latched before driving your PENING vehicle. If the hood is not fully latched, it could open when the vehicle is in motion and block your vision. The hood release lever (to open the primary latch) and Failure to follow this warning could result in serious safety latch (to open the secondary latch) must be injury or death.

  • Page 59: To Lock/Close The Liftgate

    GETTING TO KNOW YOUR VEHICLE The key fob and the overhead console button will release Using the previous ways to open or close the liftgate: LOSE IFTGATE the liftgate when the liftgate is locked. The outside handle  When the liftgate is fully closed, the liftgate will open requires the liftgate to be unlocked.

  • Page 60: Cargo Area Features

    GETTING TO KNOW YOUR VEHICLE The key fob and the overhead console button will operate NOTE: ARGO EATURES the liftgate when the liftgate is locked. The outside handle If the power liftgate will not fully open or latch close, check Cargo Area Storage requires the liftgate to be unlocked.

  • Page 61: Getting To Know Your Instrument Panel

    GETTING TO KNOW YOUR INSTRUMENT PANEL BASE INSTRUMENT CLUSTER...

  • Page 62: Base Instrument Cluster Descriptions

    GETTING TO KNOW YOUR INSTRUMENT PANEL  The gauge can indicate a higher temperature Fuel Gauge NSTRUMENT LUSTER when driving in hot weather or up mountain  The gauge shows the level of fuel in the fuel tank when ESCRIPTIONS grades.

  • Page 63: Premium Instrument Cluster

    GETTING TO KNOW YOUR INSTRUMENT PANEL PREMIUM INSTRUMENT CLUSTER...

  • Page 64: Premium Instrument Cluster Descriptions

    GETTING TO KNOW YOUR INSTRUMENT PANEL Using a driver interactive display located on the REMIUM NSTRUMENT LUSTER CAUTION! instrument panel, your instrument cluster display can ESCRIPTIONS show you how systems are working and give you warnings Driving with a hot engine cooling system could damage when they are not.

  • Page 65: Oil Life Reset

    GETTING TO KNOW YOUR INSTRUMENT PANEL The instrument cluster display controls allows the driver to  Right Arrow Button NOTE: select information by pushing the directional buttons This procedure should only be performed after scheduled Push and release the right arrow button to access mounted on the steering wheel: maintenance is completed.

  • Page 66: Keysense Cluster Messages

    GETTING TO KNOW YOUR INSTRUMENT PANEL — Vehicle Info ENSE LUSTER ESSAGES Instrument Cluster Display Setting QUIPPED Push and release the up or down arrow button Message until Vehicle Info is highlighted in the instrument cluster “Feature cannot be disabled. When the KeySense key is in use there will be: display.
  • Page 67 GETTING TO KNOW YOUR INSTRUMENT PANEL Fuel Economy Stop / Start – If Equipped Oil Pressure Displays the actual oil pressure. Push and release the up or down arrow button Push and release the up or down arrow button until the Fuel Economy Menu item is highlighted in the until the Stop/Start menu title is displayed in the Oil Life instrument cluster display.

  • Page 68: Battery Saver On/Battery Saver Mode Message - Electrical Load Reduction Actions - If Equipped

    GETTING TO KNOW YOUR INSTRUMENT PANEL BASE INSTRUMENT CLUSTER DISPLAY PREMIUM INSTRUMENT CLUSTER DISPLAY ATTERY AVER ATTERY AVER SCREEN SETUP OPTIONS SCREEN SETUP OPTIONS — E ESSAGE LECTRICAL — I EDUCTION CTIONS QUIPPED Upper Left or Upper Right Lower Left or Lower Right None Compass Outside Temp...

  • Page 69: Warning Lights And Messages

    GETTING TO KNOW YOUR INSTRUMENT PANEL NOTE:  Unusual driving cycles (short trips separated by long  The vehicle should have service performed if the parking periods). message is still present during consecutive trips and  The charging system is independent from load reduc- the evaluation of the vehicle and driving pattern did not ...
  • Page 70 GETTING TO KNOW YOUR INSTRUMENT PANEL Battery Charge Warning Light Door Open Warning Light — If Equipped NOTE: The light may flash momentarily during sharp cornering This warning light will illuminate when the This warning light will illuminate when a door is maneuvers, which change fluid level conditions.
  • Page 71 GETTING TO KNOW YOUR INSTRUMENT PANEL Liftgate Open Warning Light NOTE: on. When driving, if the driver or front passenger seat belt remains unbuckled, the Seat Belt Reminder Light will flash This light may turn on if the accelerator and brake pedals This warning light will illuminate when the or remain on continuously and a chime will sound are pressed at the same time.

  • Page 72: Yellow Warning Lights

    GETTING TO KNOW YOUR INSTRUMENT PANEL Vehicle Security Warning Light — Electronic Stability Control (ESC) Active Engine Check/Malfunction Indicator If Equipped Warning Light — If Equipped Warning Light (MIL) This warning light will flash at a fast rate for This warning light will indicate when the ESC The Engine Check/Malfunction Indicator Light (MIL) approximately 15 seconds when the vehicle system is Active.
  • Page 73 GETTING TO KNOW YOUR INSTRUMENT PANEL Service Stop/Start System Warning Light — vehicle has tires of a different size than the size indicated CAUTION! on the vehicle placard or tire inflation pressure label, you If Equipped should determine the proper tire inflation pressure for Prolonged driving with the Malfunction Indicator This warning light will illuminate when the those tires.

  • Page 74: Yellow Indicator Lights

    GETTING TO KNOW YOUR INSTRUMENT PANEL Turn Signal Indicator Lights TPMS from functioning properly. Always check the TPMS REEN NDICATOR IGHTS malfunction light after replacing one or more tires or When the left or right turn signal is activated, Cruise Control Set Indicator Light — wheels on your vehicle to ensure that the replacement or the turn signal indicator will flash alternate tires and wheels allow the TPMS to continue to...

  • Page 75: Blue Indicator Lights

    GETTING TO KNOW YOUR INSTRUMENT PANEL If any of these systems require service, the OBD II system NDICATOR IGHTS WARNING! will turn on the Malfunction Indicator Light (MIL). It will High Beam Indicator Light also store diagnostic codes and other information to ...

  • Page 76: Emissions Inspection And Maintenance

    GETTING TO KNOW YOUR INSTRUMENT PANEL EMISSIONS INSPECTION AND Your vehicle has a simple ignition actuated test, which you If your OBD II system is not ready, you should see an can use prior to going to the test station. To check if your authorized dealer or repair facility.

  • Page 77: Starting And Operating

    STARTING AND OPERATING STARTING THE ENGINE NOTE: ORMAL TARTING Only press one pedal at a time while driving the vehicle. To Turn On The Engine Using ENGINE START/STOP Button Torque performance of the vehicle could be reduced if Before starting your vehicle, adjust your seat, adjust both inside and outside mirrors, and fasten your seat belts.
  • Page 78 STARTING AND OPERATING ALWAYS DO A VISUAL CHECK that your vehicle is in PARK AutoPark will engage when all of these conditions are met: WARNING! by looking for the “P” in the instrument cluster display and  Vehicle is equipped with a gear selector on the gear selector.

  • Page 79: Cold Weather Operation

    STARTING AND OPERATING To Turn On The Engine Using ENGINE START/STOP Button EATHER PERATION WARNING! The transmission must be in PARK or NEUTRAL. –22°F O −30°C) ELOW  When exiting the vehicle, always make sure the igni- Press and hold the brake pedal while pushing the tion is in the OFF position, remove the key fob from To ensure reliable starting at these temperatures, use of ENGINE START/STOP button once.

  • Page 80: To Turn Off The Engine Using Engine Start/Stop Button

    STARTING AND OPERATING ENGINE BREAK-IN RECOMMENDATIONS For ambient temperatures below 0°F (-18°C), the engine NGINE SING block heater is recommended. For ambient temperatures ENGINE START/STOP B UTTON below -20°F (-29°C), the engine block heater is required. A long break-in period is not required for the engine and drivetrain (transmission and axle) in your vehicle.

  • Page 81: Parking Brake

    STARTING AND OPERATING PARKING BRAKE brake is fully engaged, the Brake Warning Light in the NOTE: instrument cluster and an indicator on the switch will When parking on a hill, it is important to turn the front illuminate. If your foot is on the brake pedal while you wheels toward the curb on a downhill grade and away from (EPB) LECTRIC...
  • Page 82 STARTING AND OPERATING Brake Service Mode To disengage the parking brake while the vehicle is in WARNING! motion, release the switch. If the vehicle is brought to a We recommend having your brakes serviced by an complete stop using the parking brake, when the vehicle ...

  • Page 83: Automatic Transmission

    STARTING AND OPERATING WARNING! CAUTION! WARNING! You can be badly injured working on or around a motor Damage to the transmission may occur if the following  It is dangerous to shift out of PARK or NEUTRAL if the vehicle. Do only that service work for which you have precautions are not observed: engine speed is higher than idle speed.

  • Page 84: Brake/Transmission Shift Interlock (Btsi) System

    STARTING AND OPERATING The electronically controlled transmission adapts its shift RAKE RANSMISSION HIFT ANGES schedule based on driver inputs, along with environmental (BTSI) S NTERLOCK YSTEM and road conditions. The transmission electronics are Do not press the accelerator pedal when shifting from self-calibrating;...
  • Page 85 STARTING AND OPERATING If the transmission becomes extremely hot, the CAUTION! WARNING! Transmission Temperature Warning Light will illuminate, a warning message will appear in the instrument cluster,  Before moving the transmission gear selector out of Do not coast in NEUTRAL and never turn off the ignition to and the transmission may operate differently until the PARK, you must start the engine, and also press the coast down a hill.

  • Page 86: Active Noise Cancellation

    STARTING AND OPERATING In the event of a momentary problem, the transmission NOTE: If the Steering icon is displayed and the “POWER STEERING can be reset to regain all forward gears by performing the SYSTEM OVER TEMP” message is displayed on the instrument The torque converter clutch will not engage until the following steps: cluster screen, this indicates an over temperature condition in...

  • Page 87: Stop/Start System - If Equipped

    STARTING AND OPERATING STOP/START SYSTEM — IF EQUIPPED  Engine temperature is too high. OSSIBLE EASONS NGINE  5 mph (8 km/h) threshold has not been achieved from UTOSTOP The Stop/Start function is designed to reduce fuel previous Autostop. consumption. The system will stop the engine automatically Prior to engine shut down, the system will check many ...

  • Page 88: To Manually Turn Off The Stop/Start System

    STARTING AND OPERATING ANUALLY ANUALLY TART YSTEM TART YSTEM After turning off the Stop/Start system, push the Stop/Start OFF switch again (located on the switch bank). The light on the switch will turn off. YSTEM ALFUNCTION If there is a malfunction in the Stop/Start system, the system will not shut down the engine.

  • Page 89: Parksense Rear Park Assist

    STARTING AND OPERATING To Activate U.S. Speed (mph) WARNING!  Pushing the SET (+), or SET (-) button once will result in Push the on/off button to activate the Cruise Control. The Cruise Control can be dangerous where the system a 1 mph speed adjustment.

  • Page 90: Parksense Sensors

    STARTING AND OPERATING NOTE: NOTE: ENSE ARNING ISPLAY  The driver can override the automatic braking function  The system is designed to assist the driver and not to The ParkSense Warning screen will only be displayed if Sound by pressing the gas pedal, turning ParkSense off via substitute the driver.
  • Page 91 STARTING AND OPERATING Rear ParkSense Arcs 1 — Continuous Tone/Flashing Arc 4 — Slow Tone/Solid Arc 2 — Fast Tone/Flashing Arc 5 — Slow Tone/Solid Arc 3 — Fast Tone/Flashing Arc 6 — Single 1/2 Second Tone/Solid Arc...
  • Page 92 STARTING AND OPERATING The vehicle is close to the obstacle when the warning display shows one flashing arc and sounds a continuous tone. The following chart shows the warning alert operation when the system is detecting an obstacle: WARNING ALERTS Rear Distance Greater than 79-59 inches...

  • Page 93: Enabling And Disabling Parksense

    STARTING AND OPERATING If “PARKSENSE UNAVAILABLE WIPE REAR SENSORS” appears  ParkSense, when on, will reduce the volume of the NABLING ISABLING ENSE in the instrument cluster display, make sure the outer surface radio when it is sounding a tone. ParkSense can be enabled and disabled with and the underside of the rear fascia/bumper is clean and clear ...

  • Page 94: Parkview Rear Back Up Camera

    STARTING AND OPERATING PARKVIEW REAR BACK UP CAMERA Different colored zones indicate the distance to the rear of WARNING! the vehicle. The ParkView Rear Back Up Camera allows you to see an  Before using ParkSense, it is strongly recommended The following table shows the approximate distances for on-screen image of the rear surroundings of your vehicle that the ball mount and hitch ball assembly be...

  • Page 95: Refueling The Vehicle

    STARTING AND OPERATING Remove the fuel filler nozzle. CAUTION! CAUTION! To close the fuel filler door, push the center-rear edge  To avoid vehicle damage, ParkView should only be used To avoid fuel spillage and overfilling, do not “top off” the (3 o’clock position) of the fuel filler door and then as a parking aid.

  • Page 96: Trailer Towing

    STARTING AND OPERATING TRAILER TOWING Payload values are determined by weighing your vehicle on a commercial scale before any occupants or cargo are The payload of a vehicle is defined as the allowable load added. In this section you will find safety tips and information on weight a truck can carry, including the weight of the driver, limits to the type of towing you can reasonably do with your Loading...
  • Page 97 STARTING AND OPERATING Gross Combination Weight Rating (GCWR) Trailer Sway Control (TSC) Weight-Distributing Hitch The GCWR is the total permissible weight of your vehicle The TSC can be a mechanical telescoping link that can be A Weight-Distributing Hitch works by applying leverage through and trailer when weighed in combination.

  • Page 98: Trailer Hitch Classification

    STARTING AND OPERATING RAILER ITCH LASSIFICATION The following chart provides the industry standard for the maximum trailer weight a given trailer hitch class can tow and should be used to assist you in selecting the correct trailer hitch for your intended towing condition. Trailer Hitch Classification Definitions Class Max.

  • Page 99: Trailer Towing Weights

    STARTING AND OPERATING RAILER OWING EIGHTS AXIMUM RAILER EIGHT ATINGS The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine/Transmission Trailer Tow Package GCWR Frontal Area Maximum GTW Maximum Trailer TW 8,600 lb (3,900 kg) 40 sq ft (3.72 sq m) 3,600 lb (1,632 kg) 360 lb (163 kg)
  • Page 100 STARTING AND OPERATING Max Cargo With Maximum Number Of Persons / Weight Of Occupants Max Cargo No Trailer Maximum Trailer TW TW 360 lb (163 kg) 1,205 lb (546 kg) – 360 lb (163 kg) = 845 lb (383 kg) 2 People / 300 lb (136 kg) 1,205 lb (546 kg) 845 lb (383 kg)

  • Page 101: Trailer And Tongue Weight

    STARTING AND OPERATING RAILER ONGUE EIGHT OWING EQUIREMENTS WARNING! Never exceed the maximum tongue weight stamped on To promote proper break-in of your new vehicle drivetrain  When hauling cargo or towing a trailer, do not over- your fascia/bumper or trailer hitch. components, the following guidelines are recommended.
  • Page 102 STARTING AND OPERATING Towing Requirements — Tires The electrical connections are all complete to the vehicle WARNING! but you must mate the harness to a trailer connector.  Do not attempt to tow a trailer while using a compact Refer to the following illustrations. ...

  • Page 103: Towing Tips

    STARTING AND OPERATING Cruise Control — If Equipped 4 — Ground 5 — Battery  Do not use on hilly terrain or with heavy loads. 6 — Right Stop/Turn  When using the Cruise Control, if you experience speed 7 — Electric Brakes drops greater than 10 mph (16 km/h), disengage until you can get back to cruising speed.

  • Page 104: Driving Tips

    STARTING AND OPERATING DRIVING TIPS NOTE: Recreational Towing Front-Wheel Drive (FWD) Models  To avoid inadvertent Electric Park Brake (EPB) engage- ment, you must ensure that the Auto Park Brake RIVING LIPPERY URFACES Recreational towing is allowed ONLY if the front wheels feature is disabled before towing this vehicle (if rear are OFF the ground.

  • Page 105: Driving Through Water

    STARTING AND OPERATING Traction Shallow Standing Water CAUTION! When driving on wet or slushy roads, it is possible for a Although your vehicle is capable of driving through shallow  Do not exceed 5 mph (8 km/h) when driving through wedge of water to build-up between the tire and road standing water, consider the following Warnings and standing water.

  • Page 106: Multimedia

    MULTIMEDIA UCONNECT SYSTEMS Your vehicle may be equipped with certain security features to WARNING! reduce the risk of unauthorized and unlawful access to vehicle systems and wireless communications. Vehicle software For detailed information about your Uconnect 5 With  As always, if you experience unusual vehicle technology continues to evolve over time and FCA US LLC, 7-inch Display or Uconnect 5/5 NAV With 10.1-inch behavior, take your vehicle to an authorized dealer...

  • Page 107: Uconnect Settings

    MULTIMEDIA UCONNECT SETTINGS For the Uconnect 5 With 7-inch Display and the Uconnect USTOMER ROGRAMMABLE EATURES 5/5 NAV With 10.1-inch Display The Uconnect system uses a combination of buttons on Press the Vehicle button, then press the Settings tab on the touchscreen and buttons on the faceplate located on the top of the touchscreen.
  • Page 108 MULTIMEDIA KeySense The vehicle’s KeySense settings are protected by a unique four-digit PIN, which the vehicle owner creates when accessing the specific settings for the first time. This four-digit PIN can only be reset by an authorized dealer. After pressing the KeySense button on the touchscreen, and entering the KeySense PIN, the following settings will be available: NOTE: Depending on the vehicle’s options, feature settings may vary.
  • Page 109 MULTIMEDIA My Profile When the My Profile button is pressed on the touchscreen, the system displays options related to the vehicle’s profiles. NOTE: Depending on the vehicle’s options, feature settings may vary. Setting Name Description This setting will change the language of the Uconnect system and Instrument Cluster Display. The available languages Language are English, Français, Español, and Italiano.
  • Page 110 MULTIMEDIA Setting Name Description Voice Options This setting will allow you to change the voice options for the radio to “Male” or “Female”. Wake Up Word This setting will allow you to turn the voice recognition “Wake Up” word on or off. Voice Barge-in This setting will allow you to turn the voice recognition barge-in feature on or off.
  • Page 111 MULTIMEDIA Display After pressing the Display button on the touchscreen, the following settings will be available: NOTE: Depending on the vehicle’s options, feature settings may vary. Setting Name Description This setting will change the language of the Uconnect system and Instrument Cluster Display. The available languages Language are English, Français, Español, and Italiano.
  • Page 112 MULTIMEDIA Safety & Driving Assistance After pressing the Safety & Driving Assistance button on the touchscreen, the following settings will be available: NOTE: Depending on the vehicle’s options, feature settings may vary. Setting Name Description This setting will change the distance at which the Forward Collision Warning (FCW) alert sounds. The “Medium” Forward Collision Warning Sensitivity —...
  • Page 113 MULTIMEDIA Clock & Date After pressing the Clock & Date button on the touchscreen, the following settings will be available: NOTE: Depending on the vehicle’s options, feature settings may vary. Setting Name Description Sync Time With GPS This setting will sync the time to the GPS receiver in the system. The system will control the time via the GPS location. Set Time This setting will allow you to manually set the time of your clock.
  • Page 114 MULTIMEDIA Setting Name Description Do Not Disturb All This setting will open the “Do Not Disturb All” settings menu. The available options are “On” and “Off”. Enable Two Active Phones This setting will enable or disable two active phones with the vehicle. The setting options are “On” and “Off”. Phone Pop-Ups Displayed In Cluster This setting will activate phone message pop-ups in the Instrument Cluster Display.
  • Page 115 MULTIMEDIA Camera When the Camera button is pressed on the touchscreen, the system displays the options related to the vehicle’s camera features. NOTE: Depending on the vehicle’s options, feature settings may vary. Setting Name Description ParkView Backup Camera Delay This setting will add a timed delay to the ParkView Backup Camera when shifting out of REVERSE. ParkView Backup Camera Active Guidelines This setting will turn the ParkView Backup Camera Active Guidelines on or off.
  • Page 116 MULTIMEDIA Lights When the Lights button is pressed on the touchscreen, the system displays the options related to the vehicle’s exterior and interior lights. NOTE:  When the “Daytime Running Lights” feature is selected, the daytime running lights can be turned on or off. This feature is only allowed by law in the country of the vehicle purchase. ...
  • Page 117 MULTIMEDIA Doors & Locks After pressing the Doors & Locks button on the touchscreen, the following settings will be available: Setting Name Description Auto Unlock On Exit This setting will unlock the doors when any of the doors are opened from the inside. Flash Lights With Lock This setting will allow you to turn the flashing of the lights when the Lock button is pushed on the key fob on or off.
  • Page 118 MULTIMEDIA Seats & Comfort When the Seats & Comfort button is pressed on the touchscreen, the system displays the options related to the vehicle’s comfort systems when remote start has been activated or the vehicle has been started. NOTE: Depending on the vehicle’s options, feature settings may vary. Setting Name Description This setting will activate the vehicle’s comfort systems and heated seats or heated steering wheel when the vehicle is...
  • Page 119 MULTIMEDIA Audio When the Audio button is pressed on the touchscreen, the system displays options related to the vehicle’s sound system. These settings can change the audio location within the vehicle, adjust the bass or treble levels, and auto-play settings from an audio device or smartphone. NOTE: Depending on the vehicle’s options, feature settings may vary.
  • Page 120 MULTIMEDIA Notifications When the Notifications button is pressed on the touchscreen, the system displays the options related to Notifications for the system. NOTE: Depending on the vehicle’s options, feature settings may vary. Setting Name Description App Drawer Favoriting Popups This setting turns the App Favorited pop-up on or off. App Drawer Unfavoriting Popups This setting turns the App Unfavorited pop-up on or off.
  • Page 121 MULTIMEDIA Software Updates When the Software Updates button is pressed on the touchscreen, the system will display information on updating the Uconnect system’s software. NOTE: Depending on the vehicle’s options, feature settings may vary. Setting Name Description Software Downloads over Wi-Fi This setting will allow software updates to happen over Wi-Fi.

  • Page 122: Radio Operation And Mobile Phones

    MULTIMEDIA Setting Name Description Reset App Drawer to Default Order This setting will reset the app drawer to its factory default layout. Restore Settings to Default This setting will return all the previously changed settings to their factory defaults. This setting will display a pop-up that gives you the option to clear all personal data from the system, including Clear Personal Data Bluetooth®...

  • Page 123: Safety

    SAFETY SAFETY FEATURES Anti-Lock Brake System (ABS) Warning WARNING! Light (ABS)  The ABS contains sophisticated electronic equip- RAKE YSTEM The yellow ABS Warning Light will turn on when the ignition ment that may be susceptible to interference caused is placed in the ON/RUN mode and may stay on for as long by improperly installed or high output radio transmit- The ABS provides increased vehicle stability and brake as four seconds.

  • Page 124: Electronic Brake Control (Ebc) System

    SAFETY Brake System Warning Light Your vehicle may also be equipped with Dynamic Steering To enable or disable RSRA, see page 105. Ú Torque (DST), Ready Alert Braking (RAB), Rain Brake The red Brake System Warning Light will turn on when the Support (RBS) and Trailer Sway Control (TSC).
  • Page 125 SAFETY Electronic Brake Force Distribution (EBD) Electronic Stability Control (ESC) WARNING! The EBD function manages the distribution of the braking ESC enhances directional control and stability of the  Electronic Stability Control (ESC) cannot prevent the torque between the front and rear axles by limiting braking vehicle under various driving conditions.
  • Page 126 SAFETY ESC Operating Modes Activation/Malfunction Indicator Light begins to flash WARNING! during acceleration, ease up on the accelerator and apply Depending upon model and mode of operation, the ESC as little throttle as possible. Be sure to adapt your speed ...
  • Page 127 SAFETY Towing With HSA Rain Brake Support (RBS) The following conditions must be met in order for HSA to activate: HSA will also provide assistance to mitigate roll back while RBS may improve braking performance in wet conditions.  The feature must be enabled. towing a trailer.

  • Page 128: Auxiliary Driving Systems

    SAFETY The BSM system sensors operate when the vehicle is in The BSM system can become blocked if snow, ice, mud, or WARNING! any forward gear and enters standby mode when the other road contaminations accumulate on the rear fascia/ vehicle is in PARK (P).
  • Page 129 SAFETY The BSM system notifies the driver of objects in the Overtaking Traffic detection zones by illuminating the BSM Warning Light If you pass another vehicle slowly with a relative speed located in the outside mirrors in addition to sounding an less than 15 mph (24 km/h) and the vehicle remains in audible (chime) alert and reducing the radio volume the blind spot for approximately 1.5 seconds, the warning...
  • Page 130 SAFETY Rear Cross Path (RCP) The BSM system is designed not to issue an alert on stationary not be able to alert the driver. Additionally, if your vehicle objects such as guardrails, posts, walls, foliage, berms, snow is obscured by a flat object on one side the system can RCP is intended to aid the driver when backing out of parking banks, car washes, etc.

  • Page 131: Forward Collision Warning (Fcw) With Mitigation - If Equipped

    SAFETY (FCW) Blind Spot Alert Lights/Chime ORWARD OLLISION ARNING When operating in Blind Spot Alert Lights/Chime mode, the — I ITIGATION QUIPPED BSM system will provide a visual alert in the appropriate side view mirror based on a detected object. If the turn signal is then FCW with Mitigation provides the driver with audible activated, and it corresponds to an alert present on that side of warnings, visual warnings (within the instrument cluster...
  • Page 132 SAFETY FCW Braking Status And Sensitivity NOTE: WARNING!  Changing the FCW status to “Only Warning” prevents The FCW Sensitivity and Active Braking status are Forward Collision Warning (FCW) is not intended the system from providing limited active braking, or programmable through the Uconnect system to avoid a collision on its own, nor can FCW detect additional brake support if the driver is not braking...

  • Page 133: System (Tpms)

    SAFETY Service FCW Warning RESSURE ONITORING WARNING! (TPMS) If the system turns off, and the instrument cluster YSTEM Pedestrian Emergency Braking (PEB) is not intended to displays: avoid a collision on its own, nor can PEB detect every The Tire Pressure Monitoring System (TPMS) will warn ...
  • Page 134 SAFETY The TPMS will warn the driver of a low tire pressure if the NOTE: NOTE: tire pressure falls below the low-pressure warning limit for When filling warm tires, the tire pressure may need to be  The TPMS is not intended to replace normal tire care any reason, including low temperature effects and natural increased up to an additional 4 psi (28 kPa) above the and maintenance, or to provide warning of a tire failure...
  • Page 135 SAFETY TIRE PRESSURE MONITORING SYSTEM LOW The TPMS consists of the following components: Vehicles With Compact Spare — If Equipped PRESSURE WARNINGS  Receiver module The compact spare tire does not have a Tire Pressure Monitoring System sensor. Therefore, the TPMS will not ...

  • Page 136: Occupant Restraint Systems

    SAFETY OCCUPANT RESTRAINT SYSTEMS TPMS DEACTIVATION — IF EQUIPPED If a child from 2 to 12 years old (not in a rear-facing child restraint) must ride in the front passenger seat, The Tire Pressure Monitoring System (TPMS) can be move the seat as far back as possible and use the Some of the most important safety features in your vehicle deactivated if replacing all four wheel and tire assemblies proper child restraint...

  • Page 137: Seat Belt Systems

    SAFETY BeltAlert Warning Sequence NOTE: YSTEMS If BeltAlert has been deactivated and the driver or The BeltAlert warning sequence is activated when the vehicle is Buckle up even though you are an excellent driver, even outboard front seat passenger (if equipped with outboard moving above a specified vehicle speed range and the driver or on short trips.
  • Page 138 SAFETY WARNING! WARNING! WARNING!  A lap belt worn too high can increase the risk of injury  Do not allow people to ride in any area of your vehicle  A seat belt that is worn under your arm is dangerous. in a collision.
  • Page 139 SAFETY Lap/Shoulder Belt Operating Instructions Position the shoulder belt across the shoulder and chest with minimal, if any slack so that it is comfortable and not Enter the vehicle and close the door. Sit back and resting on your neck. The retractor will withdraw any slack adjust the seat.
  • Page 140 SAFETY Adjustable Upper Shoulder Belt Anchorage Remove the mini-latch plate and regular latch plate WARNING! from its stowed position in the headliner slightly In the front and second row outboard seats the shoulder behind the second or third row seat. ...
  • Page 141 SAFETY Route the shoulder belt to the inside of the left head Sit back in seat. Slide the regular latch plate up the restraint. webbing as far as necessary to allow the seat belt to go around your lap. Latch Plate And Buckle Connected Position the lap belt so that it is snug and lies low across your hips, below your abdomen.
  • Page 142 SAFETY Seat Belt Extender Seat Belts And Pregnant Women 10. To disengage the mini-latch plate from the mini-buckle for storage, insert the regular latch plate If a seat belt is not long enough to fit properly, even when into the center red slot on the mini-buckle. The seat the webbing is fully extended and the adjustable upper belt will automatically retract to its stowed position.
  • Page 143 SAFETY Seat Belt Pretensioner Switchable Automatic Locking Retractors (ALR) The front outboard seat belt system is equipped with pretensioning devices that are designed to remove slack The seat belts in the passenger seating positions are from the seat belt in the event of a collision. These devices equipped with a Switchable Automatic Locking Retractor may improve the performance of the seat belt by removing (ALR) which is used to secure a child restraint system...
  • Page 144 SAFETY Seat Belt Park Stitch — If Equipped If the passenger seating position is equipped with an ALR How To Engage The Automatic Locking Mode and is being used for normal usage, only pull the seat belt Buckle the combination lap and shoulder belt. The rear outboard seat belts may be equipped with a park stitch webbing out far enough to comfortably wrap around the to raise the latch plate for easier access to occupants.

  • Page 145: Supplemental Restraint Systems (Srs)

    SAFETY Third Row Stow Clip — If Equipped Air Bag Warning Light UPPLEMENTAL ESTRAINT (SRS) Your vehicle may be equipped with a stow clip on the lower The Occupant Restraint Controller (ORC) YSTEMS trim behind the third row. This clip is used to hold the seat monitors the readiness of the electronic parts Some of the safety features described in this section may belt out of the path of the power folding third row seat.
  • Page 146 SAFETY Front Air Bags  The Air Bag Warning Light remains on after the four to WARNING! eight-second interval. This vehicle has front air bags and lap/shoulder belts for  Being too close to the steering wheel or instrument  The Air Bag Warning Light comes on intermittently or both the driver and front passenger.
  • Page 147 SAFETY Front Air Bag Operation Occupant Classification System (OCS) — This vehicle may be equipped with a driver and/or front passenger seat belt buckle switch that detects whether Front Passenger Seat Front Air Bags are designed to provide additional the driver or front passenger seat belt is buckled. The seat protection by supplementing the seat belts.
  • Page 148 SAFETY The OCS will NOT prevent deployment of the Passenger Advanced Front Air Bag. The OCS may reduce the inflation rate of the Passenger Advanced Front Air Bag if the OCS estimates that:  The front passenger seat is unoccupied or has very light objects on it; or ...
  • Page 149 SAFETY The OCS determines the front passenger’s most probable Lighter Weight Passengers (Including Small Adults)  The front passenger’s seatback is not in the full upright classification. The OCS estimates the seated weight on the position. When a lighter weight passenger, including a small adult, front passenger seat and where that weight is located.
  • Page 150 SAFETY WARNING!  Placing an object on the floor under the front passenger seat may prevent the OCS from working properly, which may result in serious injury or death in a collision. Do not place any objects on the floor under the front passenger seat.
  • Page 151 SAFETY Knee Impact Bolsters The following requirements must be strictly followed: The SABs may help to reduce the risk of occupant injury during certain side impacts, in addition to the injury  Do not modify the front passenger seat assembly or The Knee Impact Bolsters help protect the knees of reduction potential provided by the seat belts and body components in any way.
  • Page 152 SAFETY Supplemental Side Air Bag Inflatable Curtains (SABICs) The SABICs may help reduce the risk of partial or complete The Side Air Bags will not deploy in all side collisions, ejection of vehicle occupants through side windows in including some collisions at certain angles, or some side This vehicle is equipped with Supplemental Side Air Bag certain side impact events.
  • Page 153 SAFETY If A Deployment Occurs vehicle experiences a rollover or near rollover event, and WARNING! deployment is appropriate, the rollover sensing system will The front air bags are designed to deflate immediately deploy the side air bags and seat belt pretensioners on ...
  • Page 154 SAFETY Enhanced Accident Response System Do not drive your vehicle after the air bags have deployed. Your vehicle may also be designed to perform any of these If you are involved in another collision, the air bags will not other functions in response to the Enhanced Accident Reset Procedure be in place to protect you.

  • Page 155: Child Restraints

    SAFETY These data can help provide a better understanding of the WARNING! WARNING! circumstances in which crashes and injuries occur. In a collision, an unrestrained child can become a  Do not attempt to modify any part of your air bag NOTE: projectile inside the vehicle.
  • Page 156 SAFETY Summary Of Recommendations For Restraining Children In Vehicles Child Size, Height, Weight Or Age Recommended Type Of Child Restraint Children who are two years old or younger and who have not Either an Infant Carrier or a Convertible Child Restraint, facing Infants and Toddlers reached the height or weight limits of their child restraint rearward in a rear seat of the vehicle...
  • Page 157 SAFETY Children Too Large For Booster Seats over two years old or who have outgrown the rear-facing weight WARNING! or height limit of their rear-facing convertible child seat. Children who are large enough to wear the shoulder Children should remain in a forward-facing child seat with a Do not install a rear-facing car seat using a rear support belt comfortably, and whose legs are long enough to bend harness for as long as possible, up to the highest weight or...
  • Page 158 SAFETY WARNING! Never allow a child to put the shoulder belt under an arm or behind their back. In a crash, the shoulder belt will not protect a child properly, which may result in serious injury or death. A child must always wear both the lap and shoulder portions of the seat belt correctly. Recommendations For Attaching Child Restraints Use Any Attachment Method Shown With An “X”...
  • Page 159 SAFETY LATCH Positions For Installing Child Restraints In This Vehicle Seven Passenger Quad Seating LATCH Positions Eight Passenger LATCH Positions (Includes Stow ‘n Go) Lower Anchorage Symbol (Two Anchorages Per Seating Position) Lower Anchorage Symbol (Two Anchorages Per Seven Passenger Bench Seat LATCH Positions Seating Position) Top Tether Anchorage Symbol Top Tether Anchorage Symbol...
  • Page 160 SAFETY Frequently Asked Questions About Installing Child Restraints With LATCH The child seat may touch the back of the front passenger seat if the child restraint manufacturer Can the rear-facing child restraint touch the back of the also allows contact. See your child restraint owner’s manual for more information. front passenger seat? The 2nd row head restraints on bench and the center head restraint in the 8 passenger vehicle can be removed if they interfere with the installation of the child restraint.
  • Page 161 SAFETY LATCH Anchorages (Second Row Anchorages Shown) LATCH Anchorages (Second Row Bench Anchorages Shown) Tether Strap Anchorages 7 Passenger Stow ‘n Go Seating 7 Passenger Bench Seating (Second Row Bench Anchorage Shown) Locating The Upper Tether Anchorages There are tether strap anchorages located behind all second row seating positions.
  • Page 162 SAFETY LATCH-compatible child restraint systems will be equipped with If a child restraint installed in the center position blocks the a rigid bar or a flexible strap on each side. Each will have a hook seat belt webbing or buckle for the outboard position, do not or connector to attach to the lower anchorage and a way to use that outboard position.
  • Page 163 SAFETY To Install A LATCH-Compatible Child Restraint How To Stow An Unused Switchable-ALR Installing Child Restraints Using The (ALR) Seat Belt: Vehicle Seat Belt If the selected seating position has a Switchable Automatic Locking Retractor (ALR) seat belt, stow the seat When using the LATCH attaching system to install a Child restraint systems are designed to be secured in belt, following the instructions below.
  • Page 164 SAFETY Lap/Shoulder Belt Systems For Installing Child Restraints In This Vehicle 7 Passenger Quad Seat Automatic Locking Retractor (ALR) 8 Passenger Automatic Locking Retractor (ALR) Locations Locations (Includes Stow ‘n Go) ALR — Switchable Automatic Locking Retractor ALR — Switchable Automatic Locking Retractor Top Tether Anchorage Symbol 7 Passenger Bench Seat Automatic Locking Retractor (ALR) Top Tether Anchorage Symbol...
  • Page 165 SAFETY Frequently Asked Questions The 2nd row head restraints on bench and the center head restraint in the 8 passenger vehicle can be removed if they interfere with the installation of the Can the rear head restraints be removed? child restraint. 2nd row Stow 'n Go head restraints are not removable. The 3rd row center head restraint is removable in all vehicles, but the 3rd row outboard head restraints are not removable page 35.
  • Page 166 SAFETY Place the child seat in the center of the seating Finally, pull up on any excess webbing to tighten the position. If the second row seat can be reclined, you lap portion around the child restraint while you push may recline the seat and/or raise the head restraint the child restraint rearward and downward into the (if adjustable) to get a better fit.
  • Page 167 SAFETY Installing Child Restraints Using the Top Tether Anchorage WARNING! Do not attach a tether strap for a rear-facing car seat to any location in front of the car seat, including the seat frame or a tether anchorage. Only attach the tether strap of a rear-facing car seat to the tether anchorage that is approved for that seating position, located behind the top of the vehicle seat.
  • Page 168 SAFETY Third Row Tether Attachment Remove slack in the tether strap according to the child restraint manufacturer’s instructions. The tether anchorage found on the back of the 60% seat in the third row may be used by either the left outboard or the center seating position.

  • Page 169: Safety Tips

    SAFETY SAFETY TIPS Air Bag Warning Light ONNECTED EHICLES The Air Bag Warning Light will turn on for Privacy of any wireless and wired communications cannot RANSPORTING ASSENGERS four to eight seconds as a bulb check when the be assured. Third parties may unlawfully intercept ignition switch is first placed in the ON/RUN information and private communications without your NEVER TRANSPORT PASSENGERS IN THE CARGO AREA.

  • Page 170: The Vehicle

    SAFETY ERIODIC AFETY HECKS HOULD WARNING! WARNING! UTSIDE EHICLE An improperly attached, damaged, folded, or stacked  ONLY use the passenger’s side floor mat on the floor mat, or damaged floor mat fasteners may cause passenger’s side floor area. Tires your floor mat to interfere with the accelerator, brake, or ...

  • Page 171: Exhaust Gas

    SAFETY The best protection against carbon monoxide entry into XHAUST ARBON ONOXIDE ARNINGS the vehicle body is a properly maintained engine exhaust system. WARNING! WARNING! Whenever a change is noticed in the sound of the exhaust Exhaust gases can injure or kill. They contain carbon Carbon monoxide (CO) in exhaust gases is deadly.

  • Page 172: In Case Of Emergency

    IN CASE OF EMERGENCY HAZARD WARNING FLASHERS When you must leave the vehicle to seek assistance, the If equipped, the rearview mirror contains an SOS and Hazard Warning Flashers will continue to operate even ASSIST button. though the ignition is placed in the OFF position. The Hazard Warning Flashers button is located in the WARNING! lower center area of the instrument panel.
  • Page 173 IN CASE OF EMERGENCY SOS Call WARNING! WARNING! Push the SOS Call button on the Rearview Mirror. ALWAYS obey traffic laws and pay attention to the road.  If anyone in the vehicle could be in danger (e.g., fire NOTE: ALWAYS drive safely with your hands on the steering or smoke is visible, dangerous road conditions or In case the SOS Call button is pushed in error, there will be...
  • Page 174 IN CASE OF EMERGENCY SOS Call System Limitations Even if the SOS Call system is fully functional, factors NOTE: beyond FCA US LLC’s control may prevent or stop the SOS Vehicles sold in Mexico DO NOT have SOS Call system ...

  • Page 175: Jacking And Tire Changing - If Equipped

    IN CASE OF EMERGENCY  Vehicle Customer Care – Total support for all other Place the gear selector into PARK (P). WARNING! vehicle issues. Place the ignition in OFF mode.  Being under a jacked-up vehicle is dangerous.  Uconnect Customer Care - Total support for Radio, Block both the front and rear of the wheel diagonally Phone and NAV issues.

  • Page 176: Jack And Spare Tire Location

    IN CASE OF EMERGENCY PARE OCATION The jacking tools, spare tire and portable air compressor (if equipped) or tire service kit (if equipped) are stowed behind an access panel on the left hand side of the vehicle. Jacking Equipment Jacking Equipment 1 —...

  • Page 177: Jacking Instructions

    IN CASE OF EMERGENCY Remove Jack by turning the jack screw counter- CAUTION! WARNING! clockwise to collapse from storage area that is located behind the tire. Do not attempt to raise the vehicle by jacking on  Apply the parking brake firmly and set the transmis- locations other than those indicated in the Jacking sion in PARK.
  • Page 178 IN CASE OF EMERGENCY There are two jack engagement locations on each side of the vehicle body. These locations are on the sill flange of the vehicle body. NOTE: Placement for the front and rear jacking locations are critical. See the following images for proper jacking locations. Front Lifting Point Rear Lifting Point Jack Locations...
  • Page 179 IN CASE OF EMERGENCY Place the wrench on the jack screw and turn Inflate the tire to the prescribed pressure 60 psi clockwise until the jack head is properly engaged in (4.2 Bar) using the Portable Air Compressor the described location. Do not raise the vehicle until Ú...

  • Page 180: Road Tire Installation

    IN CASE OF EMERGENCY 13. Stow the jack back in the stowage compartment and Align the valve notch in the wheel cover with the valve NSTALLATION place the access panel back. The stud of the storage stem on the wheel. Install the cover by hand, snapping the Vehicles Equipped With Wheel Covers area must be threaded through the lower part of the cover over the two lug nuts.

  • Page 181: Portable Air Compressor - If Equipped

    IN CASE OF EMERGENCY — Portable Air Compressor Usage With Inflatable Spare Tire NOTE: ORTABLE OMPRESSOR If the tire is overinflated, use the deflation button to Remove the Portable Air Compressor from the QUIPPED reduce the tire air pressure. storage location. 8.

  • Page 182: Return Inflatable Spare Tire

    IN CASE OF EMERGENCY can be used in outside temperatures down to approximately ETURN NFLATABLE PARE -4°F (-20°C). This kit will provide a temporary tire seal, allowing To return Inflatable Spare Tire to its storage location. you to drive your vehicle up to 100 miles (160 km) with a maximum speed of 50 mph (80 km/h).
  • Page 183 IN CASE OF EMERGENCY Tire Service Kit And Components And Operation  Selecting Sealant Mode  The Tire Service Kit Sealant is only intended to seal punctures less than 1/4 inch (6 mm) diameter in the Push in the Mode Select Knob and turn to this tread/contact surface of your vehicle’s tires.
  • Page 184 IN CASE OF EMERGENCY Sealing A Tire With Tire Service Kit Injecting Tire Service Kit Sealant Into The Deflated Tire: WARNING! Whenever You Stop To Use Tire Service Kit: 1. Always start the vehicle before turning the  Keep Tire Service Kit away from open flames or heat Tire Service Kit on.
  • Page 185 IN CASE OF EMERGENCY If the sealant (white fluid) does flow through the 2. Remove the speed limit label from the Tire ground. This will provide the best positioning of the kit Sealant Hose: Service Kit and place sticker on the steering when injecting the sealant into the deflated tire and wheel.
  • Page 186 IN CASE OF EMERGENCY If tire pressure is less than 19 psi (1.3 Bar): Sealant Bottle Replacement: Rotate the bottle up beyond vertical to release. The tire is too badly damaged. Do not attempt to drive the Unwrap the power cord. vehicle further.

  • Page 187: Jump Starting

    IN CASE OF EMERGENCY JUMP STARTING NOTE: REPARATIONS TART  For sealant bottle installation, follow these steps in The battery in your vehicle is located on the left side of the If your vehicle has a discharged battery it can be jump reverse order.

  • Page 188: Jump Starting Procedure

    IN CASE OF EMERGENCY NOTE: Disconnecting The Jumper Cables CAUTION! The positive battery post may be covered with a protective Disconnect the negative (-) end of the jumper cable cap. Lift up on the cap to gain access to the positive Failure to follow these procedures could result in from the remote negative post of the vehicle with the battery post.

  • Page 189: Refueling In Emergency - If Equipped

    IN CASE OF EMERGENCY REFUELING IN EMERGENCY – IF EQUIPPED Ensure funnel is inserted fully to hold flapper doors open. The vehicle is equipped with a refueling funnel for a Pour fuel into funnel opening. Cap-Less Fuel System page 174. If refueling is Ú...

  • Page 190: Manual Park Release

    IN CASE OF EMERGENCY MANUAL PARK RELEASE If the temperature gauge is moving towards or close to Follow These Steps To Activate The Manual Park Release: the HOT (H) position, you can reduce the potential for Apply firm pressure to the brake pedal while seated overheating by taking the appropriate action.

  • Page 191: Freeing A Stuck Vehicle

    IN CASE OF EMERGENCY To Reset The Manual Park Release: Use the least amount of accelerator pedal pressure that CAUTION! will maintain the rocking motion without spinning the Apply firm pressure to the brake pedal while seated wheels or racing the engine. ...

  • Page 192: Towing A Disabled Vehicle

    IN CASE OF EMERGENCY TOWING A DISABLED VEHICLE This section describes procedures for towing a disabled vehicle using a commercial towing service. Towing Condition Wheel OFF The Ground ALL MODELS Flat Tow NONE NOT ALLOWED Front ACCEPTABLE METHOD Wheel Lift Or Dolly Tow Rear NOT ALLOWED Flatbed...

  • Page 193: Enhanced Accident Response System (Ears)

    IN CASE OF EMERGENCY CAUTION! CAUTION!  Do not use sling-type equipment when towing. Recovery load should: Vehicle damage may occur.  Be applied at constant speed.  When securing the vehicle to a flatbed truck, do not  Be applied parallel to the center line of the length of attach to front or rear suspension components.

  • Page 194: Servicing And Maintenance

    SERVICING AND MAINTENANCE SCHEDULED SERVICING An authorized dealer will reset the oil change indicator Once A Month Or Before A Long Trip: message after completing the scheduled oil change. If a  Check engine oil level. scheduled oil change is performed by someone other than Your vehicle is equipped with an automatic oil change ...

  • Page 195: Maintenance Plan

    SERVICING AND MAINTENANCE AINTENANCE Refer to the Maintenance Plan for required maintenance. At Every Oil Change Interval As Indicated By Oil Change Indicator System  Change oil and filter.  Rotate the tires at the first sign of irregular wear, even if it occurs before the oil indicator system turns on. ...
  • Page 196 SERVICING AND MAINTENANCE Mileage Or Time Passed (Whichever Comes First) Or Years: 10 11 12 13 14 15 Or Kilometers: Additional Maintenance Replace engine air cleaner filter. Replace cabin air filter. To be replaced every 12,000 miles (19,000 km). Replace spark plugs. Replace the front accessory drive belt.

  • Page 197: Engine Compartment

    SERVICING AND MAINTENANCE ENGINE COMPARTMENT 3.6L E NGINE 1 — Engine Coolant Pressure Cap 5 — Windshield Washer Reservoir Cap 2 — Brake Fluid Reservoir Cap 6 — Engine Oil Fill 3 — Engine Air Cleaner Filter 7 — Engine Oil Dipstick 4 —...

  • Page 198: Checking Oil Level

    SERVICING AND MAINTENANCE HECKING EVEL DDING ASHER LUID WARNING! To ensure proper engine lubrication, the engine oil must The fluid reservoir is located in the front of the engine  Battery fluid is a corrosive acid solution and can burn be maintained at the correct level.

  • Page 199: Pressure Washing

    SERVICING AND MAINTENANCE Materials Added To Engine Oil RESSURE ASHING NGINE The manufacturer strongly recommends against the Engine Oil Selection Cleaning the engine compartment with a high pressure addition of any additives (other than leak detection dyes) washer is not recommended. Use only the manufacturer's recommended fluid to the engine oil.

  • Page 200: Engine Air Cleaner Filter

    SERVICING AND MAINTENANCE Conditions that would require replacement: NGINE LEANER ILTER WARNING!  Rib chunking (one or more ribs has separated from belt For the proper maintenance intervals page 193. Ú  You can be badly injured working on or around a body) motor vehicle.

  • Page 201: Air Conditioner Maintenance

    SERVICING AND MAINTENANCE Refrigerant Recovery And Recycling — ONDITIONER AINTENANCE R–1234yf For best possible performance, your air conditioner should R–1234yf Air Conditioning Refrigerant is a Hydrofluo- be checked and serviced by an authorized dealer at the roolefin (HFO) that is endorsed by the Environmental start of each warm season.

  • Page 202: Body Lubrication

    SERVICING AND MAINTENANCE Open the glove compartment door as far as possible Once the filter is replaced, reinstall the filter cover, to gain access to the cabin air filter compartment making sure the retaining tabs are fully secured into cover. their housings.

  • Page 203: Windshield Wiper Blades

    SERVICING AND MAINTENANCE Front Wiper Blade Removal/Installation To disengage the wiper blade from the wiper arm, INDSHIELD IPER LADES flip up the release tab on the wiper blade and while Clean the rubber edges of the wiper blades and the holding the wiper arm with one hand, slide the wiper CAUTION! windshield periodically with a sponge or soft cloth and a...
  • Page 204 SERVICING AND MAINTENANCE With the wiper blade disengaged, remove the wiper Installing The Front Wipers blade from the wiper arm by holding the wiper arm Lift the wiper arm off of the glass, until the wiper arm with one hand and separating the wiper blade from is in the full up position.

  • Page 205: Exhaust System

    SERVICING AND MAINTENANCE To remove the wiper blade from the wiper arm, grab Installing The Rear Wiper WARNING! the bottom end of the wiper blade nearest to wiper Lift the rear wiper arm pivot cap away from the glass arm with your right hand. With your left hand hold the ...

  • Page 206: Cooling System

    SERVICING AND MAINTENANCE Under normal operating conditions, the catalytic converter Check the engine cooling system hoses for brittle rubber, OOLING YSTEM will not require maintenance. However, it is important to cracking, tears, cuts, and tightness of the connection at keep the engine properly tuned to ensure proper catalyst the coolant recovery bottle and radiator.
  • Page 207 SERVICING AND MAINTENANCE  Do not use water alone or alcohol-based engine coolant Use higher concentrations (not to exceed 70%) if WARNING! products. Do not use additional rust inhibitors or anti-rust temperatures below −34°F (−37°C) are anticipated. products, as they may not be compatible with the radiator Please contact an authorized dealer for assistance.

  • Page 208: Brake System

    SERVICING AND MAINTENANCE Brake Master Cylinder As long as the engine operating temperature is satisfactory, the  Maintain engine coolant concentration at a minimum coolant bottle need only be checked once a month. of 50% OAT coolant (conforming to MS.90032) and The fluid in the master cylinder should be checked when distilled water for proper corrosion protection of your When additional coolant is needed to maintain the proper...

  • Page 209: Automatic Transmission

    SERVICING AND MAINTENANCE Fluid Level Check Selection Of Lubricant WARNING! The fluid level is preset at the factory and does not require It is important to use the proper transmission fluid to  Overfilling the brake fluid reservoir can result in adjustment under normal operating conditions.

  • Page 210: Fuses

    SERVICING AND MAINTENANCE Underhood Fuses The fuses protect electrical systems against excessive USES current. The Power Distribution Center (PDC) is located in the engine General Information When a device does not work, you must check the fuse compartment near the battery. This center contains cartridge element inside the blade fuse for a break/melt.
  • Page 211 SERVICING AND MAINTENANCE Power Distribution Center Cavity Cartridge Fuse Blade Fuse Description * If Equipped – – Not Used – 25 Amp Clear Ignition Coil/Fuel Injector – – Not Used...
  • Page 212 SERVICING AND MAINTENANCE Cavity Cartridge Fuse Blade Fuse Description * If Equipped – 25 Amp Clear Amplifier/Active Noise Control * – – Not Used – – Not Used – 5 Amp Tan Battery Sensor (IBS) – 10 Amp Red ECM (S)* –...
  • Page 213 SERVICING AND MAINTENANCE Cavity Cartridge Fuse Blade Fuse Description * If Equipped – 15 Amp Blue Media HUB / PWR Lumbar * – – Not Used 20 Amp Blue – 30 Amp Pink – Power Liftgate * 25 Amp Clear –...
  • Page 214 SERVICING AND MAINTENANCE Cavity Cartridge Fuse Blade Fuse Description * If Equipped 30 Amp Pink – Brake Vacuum Pump – – Not Used 40 Amp Green – ESP-ECU & Valves – 15 Amp Blue RF HUB/ KIN / ESL / DVD –...
  • Page 215 SERVICING AND MAINTENANCE Cavity Cartridge Fuse Blade Fuse Description * If Equipped 20 Amp Blue – Trailer Tow Back-up Lights * – 5 Amp Tan Overhead Console / RR ISC – 20 Amp Yellow Uconnect / Center Display / Telematics RR Entertainment / Media Hub / USB (S) / Rain Sensor / –...
  • Page 216 SERVICING AND MAINTENANCE Cavity Cartridge Fuse Blade Fuse Description * If Equipped 40 Amp Green – ESC Motor Pump F95A – 10 Amp Red USB IP (Run/ACC) F95B – 10 Amp Red Selectable Fuse Location – USB IP (Direct B+) –...

  • Page 217: Bulb Replacement

    SERVICING AND MAINTENANCE EPLACEMENT Replacement Bulbs, Names, And Part Numbers In the instance a bulb needs to be replaced, this section includes bulb description and replacement part numbers. Some of the inside bulbs are brass or glass-wedge base. Aluminum base bulbs are not approved. NOTE: See an authorized dealer for LED bulb replacement.
  • Page 218 SERVICING AND MAINTENANCE Exterior Bulbs Lamps Bulb Number Front Park Lamp PWY24WNA Center High Mounted Stop Lamp (CHMSL) LED (Serviced at an authorized dealer) Stop/Turn Signal Lamp W21/5WLL Rear Tail - Body Side - W21/5WLL Rear Tail/Side Marker Lamp Rear Tail - Liftgate - W5WLL Rear Side Marker Lamp Backup Lamp W21W...

  • Page 219: Tires

    SERVICING AND MAINTENANCE Tire Markings Firmly grab the front side marker lamp socket and NOTE: rotate a quarter turn counterclockwise to remove it  P (Passenger) — Metric tire sizing is based on US design from the lamp assembly. standards. P-Metric tires have the letter “P” molded into the sidewall preceding the size designation.
  • Page 220 SERVICING AND MAINTENANCE TIRE SIZING CHART EXAMPLE: Example Size Designation: P215/65R15XL 95H, 215/65R15 96H, LT235/85R16C, T145/80D18 103M, 31x10.5 R15 LT P = Passenger car tire size based on US design standards, or "..blank.." = Passenger car tire based on European design standards, or LT = Light truck tire based on US design standards, or T or S = Temporary spare tire or 31 = Overall diameter in inches (in)
  • Page 221 SERVICING AND MAINTENANCE EXAMPLE: Service Description: 95 = Load Index  A numerical code associated with the maximum load a tire can carry H = Speed Symbol  A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions ...
  • Page 222 SERVICING AND MAINTENANCE Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire; however, the date code may only be on one side. Tires with white sidewalls will have the full TIN, including the date code, located on the white sidewall side of the tire.
  • Page 223 SERVICING AND MAINTENANCE Tire Terminology And Definitions Term Definition B-pillar The vehicle B-pillar is the structural member of the body located behind the front door. Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least Cold Tire Inflation Pressure three hours, or driven less than 1 mile (1.6 km) after sitting for a minimum of three hours.
  • Page 224 SERVICING AND MAINTENANCE (4) The resulting figure equals the Tire And Loading Information Placard NOTE: Under a maximum loaded vehicle condition, gross axle available amount of cargo and luggage weight ratings (GAWRs) for the front and rear axles must load capacity. For example, if “XXX” not be exceeded.
  • Page 225 SERVICING AND MAINTENANCE Metric Example For Load Limit For example, if “XXX” amount equals 635 kg and there will be five 68 kg passengers in your vehicle, the amount of available cargo and luggage load capacity is 295 kg (635-340 (5x68) = 295 kg) as shown in step 4. NOTE: ...

  • Page 226: Tires - General Information

    SERVICING AND MAINTENANCE Ride Comfort And Vehicle Stability WARNING! WARNING! Proper tire inflation contributes to a comfortable ride. Overloading of your tires is dangerous. Overloading can  Overinflated or underinflated tires can affect vehicle Overinflation produces a jarring and uncomfortable ride. cause tire failure, affect vehicle handling, and increase handling and can fail suddenly, resulting in loss of Tire Inflation Pressures...
  • Page 227 SERVICING AND MAINTENANCE Radial Ply Tires Run Flat Tires — If Equipped Tire pressures change by approximately 1 psi (7 kPa) per 12°F (7°C) of air temperature change. Keep this in mind Run Flat tires allow you the capability to drive 50 miles (80 km) when checking tire pressure inside a garage, especially in WARNING! at 50 mph (80 km/h) after a rapid loss of inflation pressure.
  • Page 228 SERVICING AND MAINTENANCE Tread Wear Indicators Life Of Tire Replacement Tires Tread wear indicators are in the original equipment tires to help The service life of a tire is dependent upon varying factors The tires on your new vehicle provide a balance of many you in determining when your tires should be replaced.

  • Page 229: Tire Types

    SERVICING AND MAINTENANCE Snow Tires YPES WARNING! Some areas of the country require the use of snow tires All Season Tires — If Equipped  Do not use a tire, wheel size, load rating, or speed during the Winter. Snow tires can be identified by a rating other than that specified for your vehicle.

  • Page 230: Spare Tires - If Equipped

    SERVICING AND MAINTENANCE — I T, S = Temporary Spare Tire Inflate collapsible tire only after the wheel is properly PARE IRES QUIPPED installed to the vehicle. Inflate the collapsible tire using Since this tire has limited tread life, the original equipment NOTE: the electric air pump before lowering the vehicle.

  • Page 231: Wheel And Wheel Trim Care

    SERVICING AND MAINTENANCE Limited Use Spare — If Equipped Mopar® Chrome Cleaner or their equivalent is HEEL HEEL recommended or select a non-abrasive, non-acidic The limited use spare tire is for temporary emergency use All wheels and wheel trim, especially aluminum and cleaner for aluminum or chrome wheels.

  • Page 232: Snow Traction Devices

    SERVICING AND MAINTENANCE RACTION EVICES Use of traction devices require sufficient tire-to-body clearance. Due to limited clearance, the following snow traction devices are recommended. Follow these recommendations to guard against damage:  Snow traction device must be of proper size for the tire, as recommended by the snow traction device manufacturer. ...

  • Page 233: Department Of Transportation Uniform Tire Quality Grades

    SERVICING AND MAINTENANCE All passenger vehicle tires must conform The suggested rotation method is the “forward cross” RACTION RADES shown in the following diagram. This rotation pattern does to Federal safety requirements in The Traction grades, from highest to lowest, not apply to some directional tires that must not be addition to these grades.

  • Page 234: Storing The Vehicle

    SERVICING AND MAINTENANCE STORING THE VEHICLE Sustained high temperature can cause What Causes Corrosion? the material of the tire to degenerate and Corrosion is the result of deterioration or removal of paint If you are storing your vehicle for more than three weeks, and protective coatings from your vehicle.

  • Page 235: Preserving The Bodywork

    SERVICING AND MAINTENANCE INTERIORS Special Care RESERVING ODYWORK  If you drive on salted or dusty roads or if you drive near Washing EATS ABRIC ARTS the ocean, hose off the undercarriage at least once a  Wash your vehicle regularly. Always wash your vehicle month.

  • Page 236: Plastic And Coated Parts

    SERVICING AND MAINTENANCE Cleaning Plastic Instrument Cluster NOTE: WARNING! If equipped with light colored leather, it tends to show any Lenses foreign material, dirt, and fabric dye transfer more so than A frayed or torn seat belt could rip apart in a collision and The lenses in front of the instruments in this vehicle are darker colors.

  • Page 237: Technical Specifications

    TECHNICAL SPECIFICATIONS VEHICLE IDENTIFICATION NUMBER (VIN) BRAKE SYSTEM ORQUE PECIFICATIONS The VIN is on the left front corner of the instrument panel Your vehicle is equipped with dual hydraulic brake systems. If Lug Nut/Bolt **Lug Nut/Bolt Lug Nut/Bolt and is visible from outside of the vehicle through the either of the two hydraulic systems lose normal capability, the Torque Size...

  • Page 238: Fuel Requirements

    TECHNICAL SPECIFICATIONS FUEL REQUIREMENTS Tighten the lug nuts/bolts in a star pattern until each nut/ The use of reformulated gasoline is recommended. bolt has been tightened twice. Ensure that the socket is Properly blended reformulated gasoline will provide fully engaged on the lug nut/bolt (do not insert it halfway). improved performance and durability of engine and fuel While operating on gasoline with the required octane number, system components.

  • Page 239: Do Not Use E-85 In Non-Flex Fuel Vehicles

    TECHNICAL SPECIFICATIONS E-85 I Indiscriminate use of fuel system cleaning agents should be ETHYLCYCLOPENTADIENYL avoided. Many of these materials intended for gum and varnish (MMT) I EHICLES ANGANESE RICARBONYL removal may contain active solvents or similar ingredients. These can harm fuel system gasket and diaphragm materials. ASOLINE Non-Flex Fuel Vehicles (FFV) are compatible with gasoline containing up to 15% ethanol (E-15).

  • Page 240: Fluid Capacities

    TECHNICAL SPECIFICATIONS FLUID CAPACITIES Metric Fuel (Approximate) 3.6L Engine 19 gal 71 L Engine Oil With Filter 3.6L Engine 5 qt 4.7 L Cooling System* 3.6L Engine 15 qt 14.2 L * Includes heater and coolant reservoir filled to MAX level. ENGINE FLUIDS AND LUBRICANTS Component Fluid, Lubricant, or Genuine Part...

  • Page 241: Chassis Fluids And Lubricants

    TECHNICAL SPECIFICATIONS CAUTION!  Mixing of engine coolant (antifreeze) other than specified Organic Additive Technology (OAT) engine coolant (antifreeze), may result in engine damage and may decrease corrosion protection. Organic Additive Technology (OAT) engine coolant is different and should not be mixed with Hybrid Organic Additive Technology (HOAT) engine coolant (antifreeze) or any “globally compatible”...

  • Page 242: Customer Assistance

    FOR YOUR VEHICLE Available 24 hours, 7 days a week. FCA US LLC and its authorized dealers are vitally interested in your satisfaction. We want you to be happy Call 1-800-521-2779 or visit chrysler.rsahelp.com(USA) with our products and services. REPARE PPOINTMENT Call 1-800-363-4869 or visit fca.roadsideaid.com...

  • Page 243: Fca Us Llc Customer Center

    US LLC. Canada: 1-800-363-4869. Provide your name, Vehicle dispatch a towing service to transport your vehicle to the closest authorized Chrysler, Dodge, Jeep®, or Ram dealer. Identification Number (VIN) required for covered services, Flat Tire Service license plate number, and your location, including the...

  • Page 244: Puerto Rico And Us Virgin Islands

    CUSTOMER ASSISTANCE WARRANTY INFORMATION US V warranty. If you purchased a Mopar® Vehicle Protection Plan, UERTO IRGIN SLANDS you will receive Plan Provisions and an Owner Identification FCA Caribbean LLC Card in the mail within three weeks of the vehicle delivery date. See the Warranty Information for the terms and provisions If you have any questions about the service contract, call FCA of FCA US LLC warranties applicable to this vehicle and...

  • Page 245: Reporting Safety Defects

    CUSTOMER ASSISTANCE REPORTING SAFETY DEFECTS PUBLICATION ORDER FORMS To contact NHTSA, you may call the Vehicle Safety Hotline toll free at 1-888-327-4236 To order the following manuals, you may use either the 50 U NITED TATES (TTY: 1-800-424-9153); or go to website or the phone numbers listed below.

  • Page 246: Change Of Ownership Or Address

    CUSTOMER ASSISTANCE Owner's Manuals Make sure to include the following: Le présent appareil est conforme aux CNR d`Innovation, Science and Economic Development applicables aux These Owner's Manuals have been prepared with the  Date of Sale (mm/dd/yy) appareils radio exempts de licence. L'exploitation est assistance of service and engineering specialists to ...
  • Page 247 INDEX Air Pressure Tires................224 About Your Brakes ............235 Back Up Camera............. 92 Alarm Adding Engine Coolant (Antifreeze) ......205 Base Instrument Cluster ......... 60 Arm The System............16 Additives, Fuel .............. 237 Battery..............68 Disarm The System ........... 16 Adjust Charging System Light..........
  • Page 248 Cleaning Dipsticks Wheels ..............229 Oil (Engine) .............. 196 Camera ................92 Climate Control ............... 44 Disable Vehicle Towing ..........190 Camera, Rear ..............92 Manual ............... 44 Disposal Capacities, Fluid............238 Rear................47 Antifreeze (Engine Coolant)........205 Caps, Filler Cold Weather Operation..........77 Door Ajar ..............
  • Page 249 Checking Oil Level ..........196 Flash-To-Pass............39 Compartment............195 Flat Tire Changing........173 Gas Cap (Fuel Filler Cap) ..........93 Compartment Identification........195 Flat Tire Stowage ........180 Gasoline, (Fuel) ............236 Coolant (Antifreeze) ..........238 Flooded Engine Starting ..........77 Gasoline, Clean Air ............
  • Page 250 Passing ............... 39 Reading..............41 Ignition ................12 Lane Change And Turn Signals........39 Seat Belt Reminder........... 69 Switch .................12 Lane Change Assist ..........39 Security Alarm ............70 Inside Rearview Mirror.......... 38 Lap/Shoulder Belts ............135 Service ..............215 Instrument Cluster ...........60 Latches................168 Side Marker .............
  • Page 251 Map/Reading Lights ............41 Oil, Engine ............197 Power Seats Marker Lights, Side............216 Capacity ..............238 Down ................33 Media Hub ...............52 Checking ..............196 Forward..............33 Methanol ..............236 Dipstick ..............196 Rearward ..............33 Mirrors ................38 Disposal ..............197 Up................33 Automatic Dimming ...........38 Filter ...............
  • Page 252 Remote Starting Inspection ..............167 Side View Mirror Adjustment ......... 38 Exit Remote Start Mode ..........14 Lap/Shoulder Belt Operation .........137 Signals, Turn ..........39 Uconnect Customer Programmable Features ..15 Lap/Shoulder Belt Untwisting ........137 Snow Chains (Tire Chains)........... 230 Uconnect Settings............15 Lap/Shoulder Belts ..........135 Snow Tires ..............
  • Page 253 Spinning ..............225 Trailer Towing ............100 Telescoping Steering Column ........22 Uconnect Tread Wear Indicators..........226 Tilt Steering Column ............22 Uconnect Settings............. 15 Wheel Nut Torque............235 Time Delay Uconnect 4C/4C Nav With 8.4-Inch Display....105 To Open Hood ..............56 Headlight ..............39 Uconnect Settings Tongue Weight/Trailer Weight ........
  • Page 254 Wind Buffeting ..............55 Window Fogging.............. 48 Warning Lights (Instrument Cluster Descriptions)..70 Windows ................54 Warning Lights And Messages ........67 Power ................. 54 Warranty Information........... 242 Windshield Defroster............167 Washers, Windshield ........... 196 Windshield Washers..........42 Washing Vehicle............233 Fluid................196 Water Windshield Wiper Blades ..........201 Driving Through............
  • Page 255 It is always the driver’s responsibility to comply with all local laws. This Owner’s Manual has been prepared to help you get acquainted with your new Chrysler brand vehicle and to provide a convenient reference source for common questions.
  • Page 256 Chrysler brand vehicle. Simply download the app, select your make and model and enjoy the ride. To get this app, go directly to the App Store® or Google Play® Store and enter the search keyword “Chrysler” (U.S. residents only).

Table of Contents