Chrysler 1998 Voyager Service Manual page 458

Table of Contents

Advertisement

8L - 6
LAMPS
ADJUSTMENTS (Continued)
side of vehicle center line. Use these lines for left/
right adjustment reference.
HEADLAMP ADJUSTMENT
A properly aimed low beam headlamp will project
the center of the low beam hot spot on the alignment
screen 229 mm (9 in.)
headlamp center line. The center of the hot spot
should be 100 mm (4 in.)
headlamp center line (Fig. 2). The high beams on a
vehicle with aero headlamps cannot be aligned. The
high beam pattern should be correct when the low
beams are aligned properly.
To adjust headlamp alignment, rotate adjusting
screws to achieve the specified low beam hot spot
location (Fig. 3).
HEADLAMP ADJUSTMENT – TOWN AND
COUNTRY
A properly aimed low beam headlamp will project
the center of the low beam hot spot on the alignment
screen 152 mm (6 in.)
headlamp center line. The center of the hot spot
should be 254 mm (10 in.)
the headlamp center line (Fig. 4). The high beams on
a vehicle with aero headlamps cannot be aligned. The
Fig. 2 Headlamp Alignment Screen
50 mm (2 in.) below the
50 mm (2 in.) right of the
50 mm (2 in.) below the
50 mm (2 in.) right of
Fig. 3 Headlamp Bubble Level and Adjusters
high beam pattern should be correct when the low
beams are aligned properly.
NS

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents