Mitel 5340 User Reference Manual page 15

Mitel IP Phone User Reference Guide Release 4.1
To enter a pre-programmed account code before you place a call, follow these
steps:
1. Select the Account Code key. The Information Area Display briefly shows
the account code that has been pre-programmed.
2. The next available line appearance is selected, dialtone is heard and your
phone display updates.
3. Proceed with making your call.
To enter a pre-programmed account code during a call, follow these steps:
1. Select the Account Code key. The Information Area Display briefly shows
the account code that has been pre-programmed.
NOTE: You can re-enter an account code for a call multiple times. The last
account code entered is the account code that will be assigned to the call.
To cancel account code entry before the call is placed, replace the handset
(or, if using the speakerphone, press the
entry during a call cannot be cancelled.
If the pre-programmed account code has an invalid length, the phone
LCD briefly displays "Invalid Account Code". Contact your system
administrator to determine the valid account code length for your business.
You cannot assign an account code to a call once it has been completed.
Call Lists on the 5340 phone
Call list on the 5340 phone
Call list keeps a list of the calls that you make and receive. The call list is
accessible from your phone. You can redial any calls that you made from the call
list. See "Redial on the 5340 phone" on page 14. You may be able to dial a
number from your incoming call list if it is supported by Broadview Networks.
To view the list of incoming calls received, follow these steps:
1. Press the CALLS softkey on your phone. If you have programmed one of
your programmable keys as Incoming Calls List, you can press this key
instead.
The caller's name of the most recent call that you received is displayed. If the
name of the caller is not known, the number will be displayed.
2. Use the keys to navigate the list.
3. Press the TIME softkey if you wish to display the time and date of the call.
4. Press the NUMBER softkey if you wish to display the number of the caller.
5. Press the NAME softkey if you wish to display the name of the caller again. If
the name is not known, this option is not available.
6. Press the QUIT softkey to exit from the call list.
To call a number from your incoming calls list (only available if dialing from the
incoming call list is supported by Broadview Networks):
key). Account code speed
13