Making A Call On The 5224/5324 Phone - Mitel 5340 User Reference Manual

Mitel IP Phone User Reference Guide Release 4.1
LCD displays the number and name of the caller, if known. If the name of the
caller is unknown, either the phone number or "Unknown Caller" is displayed.
To answer a second call, choose one of the following:
• Press the flashing Line Appearance key. This puts the active call on
hold and answers the second call.
• End the first call by replacing the handset. The phone will start ringing.
Pick up the handset again to answer the second call.
To switch between two active calls, press the flashing Line Appearance key.
This puts the active call on hold, and activates the other call.
NOTE: If the display shows )) prior to the number calling, this indicates that it is a
second call.
Answering a call group call on the 5224/5324 phone
When an incoming call to a call group is received on a phone, the second line of
the phone LCD displays the name of the group that was called. The first line
continues to display the number and name of the caller, if known.
.
To answer an incoming call group call, use the handset or speakerphone.

Making a call on the 5224/5324 phone

To make a call, follow these steps:
1. Lift the handset. This will select the next available Line Appearance. You can
also start dialing the number without lifting the handset. This will
automatically select the next available Line Appearance and operate in
speakerphone mode.
2. To make an internal call, dial the extension. To make an external call, dial the
prefix required for external dialing (usually "9") followed by the number you
want to call.
))321: Robin Jones
321: Robin Jones
For: Sales Group
REDIAL CALLS DIR
320
31