Using Features Via The 5224/5324 Phone - Mitel 5340 User Reference Manual

Mitel IP Phone User Reference Guide Release 4.1
external call, the LCD displays the name of the connected party, or if the
name is unknown, just the phone number.
5. To switch between two active calls, press the flashing Line Appearance key.
This puts the active call on hold and activates the other call.
Ending one call keeps the second call on hold. To reconnect to the second call,
press the flashing Line Appearance key.

Using features via the 5224/5324 phone

This section explains the features available from your phone. Some of these
features must be pre-programmed in order to be available. To learn how to
program features to keys, see "Program memory keys" on page 104.
3-way call on the 5224/5324 phone
Using 3-Way Call, you can set up a phone call among three separate parties.
To activate 3-Way Call, follow these steps:
1. While on an active call, press the CONF softkey. This places the first call on
hold, and selects an available Line Appearance. The LCD screen displays:
2. Enter the phone number of the third party.
3. The system dials the number and displays a "Calling" message along with
the caller ID on the first line of the LCD screen.
4. When the third party answers the call, the LCD will show that a connection is
established.
5. Press the CONF softkey again. The 3-Way Call is now activated. The LCD
displays:
320: Robin Jones
TRANS CONF END
Conf with:
DIR QUIT
Calling:Lesley Gr
QUIT
Lesley Greene
CONF QUIT
3-Way Call
TRANSFER END
33