Using Features Via The 5212/5312 Ip Phone - Mitel 5340 User Reference Manual

Mitel IP Phone User Reference Guide Release 4.1
Making a second call on the 5212/5312 IP phone
To make a second call while on an active call, follow these steps:
1. Press any available Line Appearance key. This puts the active call on hold
and provides dial tone for a second call.
2. To make an internal call, dial the extension. To make an external call, dial the
prefix required for external dialing (usually 9) followed by the number you
want to call.
3. When you finish dialing the number, the call is placed.
4. If you place an internal call, the LCD displays the extension and name of the
connected party once the call is answered. If you place an external call, the
LCD screen displays the name of the connected party, or if the name is
unknown, just the phone number.
5. To switch between two active calls, press the flashing Line Appearance key.
This puts the active call on hold and activates the other call.
Ending one call keeps the second call on hold. To reconnect to the second call,
press the flashing Line Appearance key.

Using features via the 5212/5312 IP phone

This section explains the features available from your 5212 IP phone. Some of
these features must be pre-programmed in order to be available. To learn how to
program features to keys, see "Program memory keys" on page 104.
3-way call on the 5212/5312 IP phone
Using 3-Way Call, you can set up a phone call among three separate parties.
To activate 3-Way Call, follow these steps:
1. While on an active call, press the
on hold, and selects an available Line Appearance. The LCD screen
displays:
320
Calling: Robin Jones
320: Robin Jones
key twice. This places the first call
Conf with:
57