Programmable Memory Key Features - Mitel 5340 User Reference Manual

Mitel IP Phone User Reference Guide Release 4.1
1. Select My Phone in the left menu.
The My Phone page appears.
2. Select the PKM module from the Phone Model drop-down list.
Your options are: Mitel 5412 PKM, Mitel 5448 PKM-1, or Mitel 5448 PKM-2.
Only choose the Mitel 5448 PKM -2 if this is the second PKM unit to be
attached to the phone. You should not combine a 5412 PKM with a 5448
PKM as this is not a supported configuration.
3. If you are programming a Mitel 5448 PKM, select the section of keys that you
want to program. The choice is Left Bank or Right Bank.
4. Select the memory key that you want to program by moving the mouse over
the button and left-click.
The Program Memory Key Details page appears.
5. Complete the following fields:
• Feature: Select the feature to be programmed. You cannot program a
Line Appearance on a PKM.
• Label: (Optional) Type in a description. If no description is typed the
system default will be applied.
• Details: Select from a drop-down list or type in the required number
without any spaces or characters. Not all features require this field.
• Status: Only appears with certain features. Select Active or Inactive. You
will be able to activate or deactivate the feature by pressing this memory
key on the phone once it is programmed.
6. Select the Save button to save the information or select the Close Window
button to cancel your changes.
7. Select the Close Window button to close the window.
Your phone key profile is updated.
8. Repeat steps 3-7 for each memory key to be programmed.
NOTE: To cancel your changes, select the Close Window button instead of the
Save button in step 6.
NOTE: The LEDs on the PKM are the same as on the phone except that they are
always red.

Programmable memory key features

Table 2 shows the features available to program on a memory key by a user and
a description of the fields required. Only the memory keys on your phone can be
custom configured. Options that require an LED memory key are labeled LED.
Table 2: Programmable memory key options
105