Web Login; To Stop The Security Alert At Log In - Mitel 5340 User Reference Manual

Mitel IP Phone User Reference Guide Release 4.1
Figure 7: "User Home page" on page 97 illustrates the user
window:
Figure 7: User Home page
You should always use the appropriate left hand menu link or button or link on
your screen to navigate through the web interface. You should never use the
"Back" button on your browser since the information and actions from a previous
page may no longer be valid.

Web login

To log in to the web administration interface, you need four things: (1) your
extension, (2) your PIN, (3) the Login URL, and (4) a web browser (Internet
Explorer 6.0 or later or Firefox 1.5.0.4 or later) which connects to the Internet.
These are all available from your administrator.
To log in to the web administration interface, follow these steps:
1. Type the Login URL in a web browser.
2. Type your User ID (your extension) in the Login screen. Check the
Remember my User ID check box to avoid entering this information each
time you log in. To disable this option, deselect the Remember my User ID
check box.
3. Type your PIN.
4. Select the Login button.
NOTE: If you are logged into the application and attempt to log in again, the
application logs you out of the first session and logs you in to a new session.
The system displays the message, "System has detected older open session
for this user", which has been invalidated upon current login.
You will be logged out of the web if your computer is idle for 30 minutes or
more.

To stop the security alert at log in

A Security Alert may appear when you log in if the security certificate that is
being used has not been identified as a trusted source on your computer. If you
trust the source and do not want to see the Security Alert each time you log in,
follow these steps:
98