Bearings And Oil Seals; Circlips; Rubber Parts - Yamaha 2016 Grizzly yfm700gplg Service Manual

Table of Contents

BEARINGS AND OIL SEALS

Install bearings "1" and oil seals "2" so that the

manufacturer's marks or numbers are visible.

When installing oil seals, lubricate the oil seal

lips with a light coat of lithium-soap-based

grease. Oil bearings liberally when installing, if

appropriate.

Do not spin the bearing with compressed air

because this will damage the bearing surfac-

Before reassembly, check all circlips carefully

and replace damaged or distorted circlips. Al-

ways replace piston pin clips after one use.

When installing a circlip "1", make sure the

sharp-edged corner "2" is positioned opposite

the thrust "3" that the circlip receives.

IMPORTANT INFORMATION

Check rubber parts for deterioration during in-

spection. Some of the rubber parts are sensitive

to gasoline, flammable oil, grease, etc. Do not al-

low any items other than the specified one to

contact the parts.

Table of Contents