Replacing toner cartridges and staple cartridges and emptying punch scrap box
9.3.1
To replace the imaging unit
1
Press the sub power switch.
Check that the touch panel is turned off.
2
Open the front door, and then set the main power switch to o.
–
Check that an imaging unit of the same color as the one to
be replaced has been prepared.
3
Press down to release the unlock lever of the imaging unit to
be replaced.
4
Pull the imaging unit towards you to remove it.
5
Remove the imaging unit from its packaging.
–
The imaging unit can easily be damaged by light. Leave the
imaging unit in the black protective bag until immediately
before it is to be installed.
–
Do not hold the top part of the imaging unit, otherwise the
PC drum may be damaged, resulting in decreased image
quality.
bizhub C353/C253/C203 (FE2)
9
9-13