Level Settings; Group - Konica Minolta bizhub C203 Copy Operations

Utility mode

Level settings

The access permission level can be specified for each user and destination.
The destinations that can be accessed by users can be limited according to the access permission levels
specified for the user and destination.
For example, a level 2 user can access destinations in levels 0 through 2, but cannot access destinations in
levels 3 through 5. A level 5 user can access all destinations in levels 0 through 5.
Note
For details on the access permission level settings for user, refer to "User Authentication/Account
Track" on page 12-30.
As a default, the access permission level specified for public users is level 0.

Group

In addition to users and destinations, groups with access permissions can be created and given a name.
When users and destinations are registered in these groups, a destination registered in a group can be
accessed by users registered to the same group.
In addition, by applying access permission levels to groups, users not registered in a group can be given
access permissions according to the conditions of the specified level.
A destination can be registered in only one group. However, a user can be registered in multiple groups.
bizhub C353/C253/C203 (FE2)
Level 2 user access range
Access Allow Level 3
User 1
User 2
Destinations
Level 5
Level 4
Level 3 Level 5 user access range
Level 2
Level 1
Level 0
Destination 1
Destination 2
12
User 3
12-9