Auto Tray Switch Feature; Order For Selecting Paper Trays - Konica Minolta bizhub C203 Copy Operations

Copy paper/originals
7.1.6

Auto tray switch feature

If the selected paper tray runs out of paper while a job is being printed and a different paper tray is loaded
with paper meeting the following conditions, the other paper tray is automatically selected so printing can
continue. If the optional LCT is installed, a maximum of 3,650 copies (with A4 v paper) can be made
continuously. (The paper tray is automatically switched only if the "Auto Tray Switch ON/OFF" parameter in
the Utility mode is set to "Allow".)
Operating conditions
- The paper is the same size.
- The paper is positioned in the same orientation.
- The paper is the same type.
- The paper trays are selected when the paper tray is automatically switched.
!
Detail
For details on the specifying the paper trays that are selected when the paper tray is automatically
switched, refer to "System Settings" on page 12-24.
7.1.7

Order for selecting paper trays

As a factory default, when a different paper tray is automatically selected, the next paper tray in the following
list is chosen.
When the Standard tray is installed:
Tray 1 % Tray 2 % Bypass tray
When a single paper feed cabinet is installed:
Tray 1 % Tray 2 % Tray 3 % Bypass tray
When a double paper feed cabinet is installed:
Tray 1 % Tray 2 % Tray 3 % Tray 4 % Bypass tray
When the LCT is installed:
Tray 1 % Tray 2 % Tray 3 % Bypass tray
!
Detail
To change the order in which the paper trays are selected, refer to "System Settings" on page 12-24.
bizhub C353/C253/C203 (FE2)
7
7-7