To Replace The Staple Cartridge In The Finisher Fs-609 - Konica Minolta bizhub C203 Copy Operations

9
9.4.3

To replace the staple cartridge in the finisher FS-609

1
Open the front door.
2
Slowly pull out the stapler unit as far as possible.
3
Grasp both sides of the staple cartridge holder, lift it up, and
then pull it out.
4
Press the button marked "PUSH" on the side of the staple
cartridge holder.
The staple case is released.
9-22
Replacing toner cartridges and staple cartridges and emptying punch scrap box
Stapler unit
Staple catridge holder
Staple cartridge holder
Staple case
bizhub C353/C253/C203 (FE2)