Konica Minolta bizhub C203 Copy Operations page 263

Troubleshooting
10
Open the right-side door, and then remove any misfed paper
in the transport section.
11
If the paper could not be removed in step 10, turn the misfeed-
clearing dial in the folding section clockwise.
– Feed the paper into the output tray 2, and then remove it.
12
Close the front door.
13
Return the finisher to its original position.
!
Detail
If the message "Misfeed detected." appears, be sure to open the front door, turn the misfeed-clearing
dial until the removal indicator is completely blue, and then remove the paper. If the paper is removed
with too much force, the finisher may be damaged.
Do not remove paper remaining in the transfer unit with too much force, otherwise the folding unit may
be damaged.
Be careful that your fingers are not pinched when the front door is closed.
bizhub C353/C253/C203 (FE2)
Misfeed clearing dial in the
folding section
5
5-53