Clearing Jammed Staples In The Saddle Stitcher - Konica Minolta bizhub C203 Copy Operations

5
5.3.2

Clearing jammed staples in the saddle stitcher

!
Detail
For details on clearing misfed paper in the finisher FS-519, refer to "Clearing a paper misfeed in finisher
FS-519" on page 5-45.
For details on clearing misfed paper in the saddle stitcher, refer to "Clearing a paper misfeed in the
saddle stitcher" on page 5-49.
1
Remove all paper from the finisher.
2
Raise the output tray, and then push down the staple cartridge
holder to remove it.
3
Raise the shutter of the staple cartridge holder, and then pull
out one sheet of staples.
4
Return the shutter of the staple cartridge holder to its original position.
5
Insert the staple cartridge holder, and then push it up until it
locks into place.
6
Return the output tray to its original position.
5-60
Troubleshooting
bizhub C353/C253/C203 (FE2)