Selecting A Folding Setting - Konica Minolta bizhub C203 Copy Operations

3
3.13

Selecting a folding setting

By installing optional equipments, copies can be folded, or folded and bound with staples at the same time,
and then fed out. Available settings differ depending on the optional equipments installed.
Setting
Half-Fold
Center Staple &
Fold
Note
Copies can be folded in half and bound at the center only if finisher FS-609 is installed or finisher FS-519
is installed with the saddle stitcher attached.
Copies can be folded in half only if finisher FS-519 is installed with the saddle stitcher attached.
3-82
Description
Select this setting to fold copies in half before feeding
them out. (Refer to page 3-83.)
Select this setting to staple copies at two places along
the center, then fold the copies in half before feeding
them out. (Refer to page 3-85.)
Basic copy operations
Compatible models
Finisher FS-519 + Saddle stitcher
Finisher FS-519 + Saddle stitcher
Finisher FS-609
bizhub C353/C253/C203 (FE2)