Konica Minolta bizhub C203 Copy Operations page 528

12
Printer Counter List
Description
This parameter appears only if user authentication or account track settings have been
specified. The use for each user or account can be checked.
External Server Settings
Description
Specify the external server that performs user authentication.
Limiting Access to Destinations
Parameter
Create Group
Apply Levels/Groups to Destina-
tions
Apply Levels/Groups to Users
Authentication Device Settings
Parameter
General Settings
Touch & Print Setting
Logoff Settings
!
Detail
The Authentication Device Settings parameters are available only if the optional authentication unit is
installed.
The authentication units of the IC card type and the biometric type cannot be installed at the same time.
12-32
Description
Groups for permitting access to destinations can be registered and edited.
The access permission level and the group with access permissions can be
specified for each destination.
The access permission level and the group with access permissions can be
specified for each user.
Description
Specify the settings for the installed authentication unit.
• Card Authentication: Select the IC card type and op-
eration settings.
• Bio Authentication: Select the beep and operation
settings.
Select the printing operation for Touch & Print.
• ON: Select this setting to select whether all jobs or
only one job is printed.
• OFF: Select this setting to prevent printing with
Touch & Print.
Select whether or not the user is logged off after a scan
or fax is sent or after the copy original is scanned.
Utility mode
Default Setting
Tray 1/1-Sided
Default setting
When the authentication
unit (IC card type) has
been installed:
IC Card Type: FeliCa
Operation Settings: Card
Authentication
When the authentication
unit (biometric type) has
been installed:
Beep Sound: ON
Operation Settings: 1-to-
many authentication
ON: Print All Jobs
Do not log off
bizhub C353/C253/C203 (FE2)