To Replace The Staple Cartridge In The Finisher Fs-519 - Konica Minolta bizhub C203 Copy Operations

9
9.4.1

To replace the staple cartridge in the finisher FS-519

1
Open the front door.
2
Remove the staple cartridge holder.
– Pull the staple cartridge holder toward you to remove it.
– Only touch the blue parts of the staple cartridge.
3
Remove the empty cartridge from the staple cartridge holder.
4
Load the new staple cartridge into the staple cartridge holder.
– Do not remove the remaining staples, otherwise the
machine will not be able to staple after the cartridge is
replaced.
9-18
Replacing toner cartridges and staple cartridges and emptying punch scrap box
bizhub C353/C253/C203 (FE2)