Konica Minolta bizhub C203 Copy Operations page 188

4
4
Use the control panel keypad and the keyboard that appears in the touch panel to type in the name of
the copy program.
– The program name can contain a maximum of 16 characters.
– For details on typing in text, refer to "Entering text" on page 13-3.
5
After typing in the name, touch [OK].
– The copy program can be given the same name as a copy program that has already been registered.
– To stop specifying the name of the copy program, touch [Cancel].
The Recall Copy Program screen appears again. The copy program is registered and a button with the
entered copy program name appears.
4-18
Additional copy operations
bizhub C353/C253/C203 (FE2)