Selecting The Paper Settings; Automatically Detecting The Paper Size ("Auto Detect" Setting) - Konica Minolta bizhub C203 Copy Operations

7
7.2

Selecting the Paper settings

This section describes the procedures for specifying the size and type of paper loaded in each paper tray.
!
Detail
For details on loading the paper into tray 1/2/3/4, refer to "Loading paper into tray 1/2/3/4" on
page 2-45.
For details on loading the paper into the bypass tray, refer to "Loading paper into the bypass tray" on
page 2-49.
7.2.1

Automatically detecting the paper size ("Auto Detect" setting)

The size of the paper loaded into tray 1/2/3/4 and the bypass tray can be detected automatically.
The following procedure describes how to specify the setting for automatically detecting the paper loaded
into tray 1.
1
In the Basic screen, touch [Paper].
The Paper screen appears.
2
Touch the button for tray 1.
– To select the automatic paper detection setting for tray 2/3/4 or the bypass tray, touch the button
for the corresponding paper tray.
3
Touch [Change Tray Settings].
7-8
Copy paper/originals
bizhub C353/C253/C203 (FE2)