Konica Minolta bizhub C203 Copy Operations page 28

2
No. Part name
6 Working table WT-502
7 Mount kit MK-711
8 Mount kit MK-713
9 Image controller IC-409
10 Desk DK-504
11 Paper feed cabinet PC-104
12 Paper feed cabinet PC-204
13 Paper feed cabinet PC-405
14 Finisher FS-519
15 Output tray OT-602
16 Mailbin kit MT-502
17 Saddle stitcher SD-505
18 Punch kit PK-515
19 Finisher FS-609
20 Punch kit PK-501
21 Job separator JS-505
22 Local interface kit EK-603
23 Fax kit FK-502
24 Scan accelerator kit
SA-501
25 Fax multi line ML-501
26 Video interface kit VI-504
27 Stamp unit SP-501
2-4
Description
Provides an area to temporarily place an original or other materials. This is also
used when the authentication unit is installed.
Used for installing the fax kit, local interface kit, scan accelerator kit, and fax
multi line.
Used for banner printing.
The external image controller connecting to bizhub C353/C253.
Allows this machine to be used as a color printer configured into a computer
network. For details, refer to the corresponding user manual.
!
Detail
To install the image controller, any of the LCT, single paper feed cabinet,
or double paper feed cabinet must be installed to the machine.
Allows this machine to be set up on the floor.
Referred to as the "desk" throughout the manual.
The top tray can be loaded with up to 500 sheets of paper, and the bottom tray
can be used as storage.
Referred to as the "single paper feed cabinet" throughout the manual.
Both the top and bottom trays can each be loaded with up to 500 sheets of
paper.
Referred to as the "double paper feed cabinet" throughout the manual.
Can be loaded with up to 2,500 sheets of paper
Referred to as the "LCT" throughout the manual.
Feeds out finished printed pages. The "Sort" setting (separating by copy set),
"Group" setting (separating by pages), and Staple settings ("Corner" and "2
position") are available.
!
Detail
To install the finisher, any of the LCT, single paper feed cabinet, or double
paper feed cabinet must be installed to the machine.
Installed onto finisher to divide printed pages.
Referred to as the "output tray" throughout the manual.
Installed onto finisher to divide printed pages (only with computer printing) and
feed them into the appropriate tray assigned to a specific individual or group.
Collects printed pages.
Referred to as the "mailbin kit" throughout the manual.
Installed onto finisher so that copies can be bound or folded at the center.
Referred to as the "saddle stitcher" throughout the manual.
Installed onto finisher to allow hole punching to be used.
Feeds out finished printed pages. The "Sort" setting (separating by copy set),
"Group" setting (separating by pages), Staple settings ("Corner" and "2 posi-
tion"), and Center Staple & Fold setting are available.
!
Detail
To install the finisher, any of the desk, LCT, single paper feed cabinet, or
double paper feed cabinet must be installed to the machine.
Installed onto finisher FS-609 to allow hole punching to be used.
Installed onto the output tray to divide printed pages.
Referred to as the "separator" throughout the manual.
*¹
Used for connecting the authentication unit (biometric type), the authentication
unit (IC card type), the JScribe IC card reader/writer and external memory
(USB memory).
*1
Allows this machine to be used as a fax machine.
Creates images at high speed when sending scans.
*1
Installed to increase the telephone lines available for faxing.
*2
Used for connecting the image controller to the bizhub C353/C253.
*2
Applies a stamp to originals that have been scanned.
For details, refer to the User manual – Network scan/Fax/Network Fax Opera-
tions.
Before making copies
bizhub C353/C253/C203 (FE2)