Copying With Programmed Copy Settings (Mode Memory) - Konica Minolta bizhub C203 Copy Operations

Additional copy operations
4.6

Copying with programmed copy settings (Mode Memory)

Programmed copy settings can be recalled to be used again for copying.
1
Position the original to be copied.
– For details on positioning the original, refer to "Feeding the original" on page 3-8.
2
Press the [Mode Memory] key.
The Recall Copy Program screen appears.
3
Touch the button for the copy program registered with the copy settings to be recalled.
– If the copy settings in the selected copy program are not to be checked, continue with step 8.
– If the copy program to be recalled is not displayed, touch
program is displayed.
bizhub C353/C253/C203 (FE2)
and until the desired copy
4
4-21