Inserting Paper Between Ohp Transparencies ("Ohp Interleave" Function) - Konica Minolta bizhub C203 Copy Operations

8
8.2 Inserting paper between OHP transparencies ("OHP Interleave"
function)
In order to prevent copies printed onto OHP transparencies from sticking together as a result of the heat that
is produced during copying, paper (interleaves) can be inserted between the transparencies
0 No Finishing setting can be used.
1
Position the original to be copied.
– For details on positioning the original, refer to "Feeding the original" on page 3-8.
– For details on loading OHP transparencies, refer to "Paper types and paper capacities" on page 7-4
and "Loading paper into the bypass tray" on page 2-49.
2
In the Basic screen, touch [Color], and then touch [Black].
– Printing on OHP transparencies is possible only in black.
3
Load the OHP transparencies into the bypass tray, and load the interleaf paper into the desired paper
tray.
– Use interleaf paper with the same size as the OHP transparencies.
4
Select [Transparency] as the paper type for the bypass tray, and then touch [OK].
– For details on specifying the paper type settings, refer to "Specifying a setting for special paper" on
page 7-20.
8-22
Application functions
bizhub C353/C253/C203 (FE2)