3
–
If the binding position for the original is set to "Auto", the position of the binding margin is
automatically selected. A binding margin along the long side of the paper is selected if the original
length is 297 mm or less. If the original length is more than 297 mm, a binding margin along the short
side of the paper is selected.
–
If "Auto" is selected under "Original Bind Direction", the binding margin is set at the top or at the left.
–
For a double-sided original, touch [Binding Position], select the binding position of the original, and
then touch [OK].
3
Touch [Original Direction], select the orientation of the loaded original, and then touch [OK].
–
For details on specifying the original orientation, refer to "Selecting the original orientation (Original
Direction settings)" on page 3-25.
4
Touch [OK].
The Basic screen appears again.
3-54
Basic copy operations
bizhub C353/C253/C203 (FE2)