Additional copy operations
4.5
Registering copy programs (Mode Memory)
Frequently used copy settings can be stored together as a program to easily be recalled. A maximum of 30
programs can be registered.
A name of up to 16 characters can be specified for the registered copy programs.
1
Using the touch panel and control panel keys, specify the copy settings to be registered in the copy
program.
?
Can the current settings be checked?
% To check the currently specified copy settings, touch [Check Job] in the left panel, and then touch
[Job Details]. For details, refer to "Checking the Copy Settings (Check Job)" on page 4-3.
2
Press the [Mode Memory] key.
The Recall Copy Program screen appears.
3
From the copy program buttons that appear in the screen, touch the button where you wish to store
the copy settings, and then touch [Register Program].
–
There are three Recall Copy Program screens. Touch
–
If 30 copy programs have been registered, delete an unnecessary copy program. For details on
deleting copy programs, refer to "Deleting a copy program" on page 4-20.
The Register Copy Program screen appears.
bizhub C353/C253/C203 (FE2)
and
to display a different screen.
4
4-17