To Replace The Imaging Unit - Konica Minolta magicolor 8650 User Manual

Replacing consumables
!
Detail
For details on replacing the imaging unit, refer to "To replace the imaging unit" on page 11-10.
Reminder
Be sure to replace the imaging unit only after the message "IU needs to be replaced. [x]" appears. In
addition, do not replace the imaging unit of any color other than the one indicated in the message on
the message window.
11.3.1

To replace the imaging unit

1
Set the power switch to "o".
Check that the control panel is turned off.
2
Open the front door.
– Check that an imaging unit of the same color as the
one to be replaced has been prepared.
3
Press down to release the unlock lever of the imaging unit
to be replaced.
4
Pull the imaging unit towards you to remove it.
8650
11
K
P U S
H
K
11-10