Konica Minolta bizhub C203 Copy Operations page 522

12
Expert Adjustment
Parameter
AE Level Adjustment
Printer Ad-
justment
Finisher Ad-
justment
Density Ad-
justment
Image Stabilization
Color Regis-
tration Ad-
just
12-26
Description
Specify the initial value for auto exposure (AE) be-
tween 0 and 4. The higher the setting, the more
that the original background is emphasized.
Leading Edge Adjust the starting print position between -3.0 and
Adjustment 3.0 mm at the leading edge of the paper (with re-
spect to the paper feed direction). Adjustments
can be specified for each paper type.
Centering Adjust the starting print position between -3.0 and
3.0 mm at the left edge of the paper (with respect
to the paper feed direction). Adjustments can be
specified for each paper tray.
Leading Edge Ad- Adjust the starting print position between -3.0 and
justment (Duplex 3.0 mm at the leading edge of the paper for the
Side 2) second side during automatic double-sided cop-
ying. Adjustments can be specified for each paper
tray.
Centering (Duplex Adjust the starting print position between -3.0 and
2nd Side) 3.0 mm at the left edge of the paper for the sec-
ond side during automatic double-sided copying.
Adjustments can be specified for each paper tray.
Media Adjustment If the print image is flawed (missing print, white
spots, or uneven printing) due to the characteris-
tics of the type of paper that is used, adjust this
parameter between -8 and +7 according to the
paper type.
Center Staple Po- Adjust the stapling position when printing with the
sition "Center Staple & Fold" setting.
Finisher FS-519:-10 to 10
Finisher FS-609:-7 mm to 7 mm
Half-Fold Position Adjust the folding position when printing with the
"Center Staple & Fold" setting.
Finisher FS-519:-10 to 10
Finisher FS-609:-7 mm to 7 mm
Punch Horizontal Adjust the horizontal position of the punched
Position Adjust- holes between -10 mm and 10 mm.
*
ment
Punch Regist Loop Adjust the hole-punching shift for double-sided
*
Size Adjustment printing and outputting cover pages between -
4 mm and 4 mm.
Thick –Yellow Adjust the image density for printing on thick pa-
per or OHP transparencies. The density can be
Thick –Magenta
adjusted separately for each color (yellow, ma-
genta, cyan and black for a color image and the
Thick –Cyan
black image density). The higher the setting, the
Thick –Black darker the density.
Adjust the setting for yellow, magenta, cyan and
Black Image Den-
black between -5 and +5.
sity
Adjust the setting for "Black Image Density" be-
tween -2 and +2.
Perform an image stabilization if the image is in-
correct, even after the gradation levels have been
adjusted.
• Image Stabilization Only:
Perform a normal image stabilization.
• Initialize + Image Stabilization:
Select when a good result was not achieved
after "Image Stabilization Mode" was select-
ed.
Color Registration Adjust the color registration if color shifts can be
Adjust (Yellow) seen in the print result.
Color Registration
Adjust (Magenta)
Color Registration
Adjust (Cyan)
Utility mode
Default Setting
Standard (2)
0.0 mm
0.0 mm
0.0 mm
0.0 mm
0
0 mm
0
0 mm
0
0
0
0
0
0
0
Image Stabilization Only
-
-
-
bizhub C353/C253/C203 (FE2)