Scanning During Warm-Up - Konica Minolta bizhub C203 Copy Operations

2
2.3.2

Scanning during warm-up

1
Press the sub power switch.
– For details on turning on the machine, refer to "Turning off the machine" on page 2-27.
The indicator on the [Start] key lights up in orange.
After the warm-up message is displayed, the Basic screen appears. The indicator on the [Start] key
lights up in blue.
2
Check that the message "Warming up. Ready to scan." appears on the touch panel.
3
Position the original to be copied.
– For details on positioning the original, refer to "Feeding the original" on page 3-8.
4
Specify any other desired copy settings.
5
Using the keypad, specify the desired number of copies.
– For details on specifying the number of copies, refer to "General copy operation" on page 3-3.
6
Press the [Start] key.
The original is scanned, and the job is added to the list of queued jobs.
– If the "Copy Operating Screen" parameter in Utility mode was set to "Yes", touch [Next Copy Job]
to display the Basic screen.
2-26
Before making copies
bizhub C353/C253/C203 (FE2)