Copying With The Page Layout Of A Booklet ("Booklet" Function) - Konica Minolta bizhub C203 Copy Operations

8
8.18

Copying with the page layout of a booklet ("Booklet" function)

The page order of the scanned original is automatically arranged to produce double-sided copies in a page
layout for center binding, such as for a magazine. Stapling is possible only when optional finisher FS-609 is
installed or optional finisher FS-519 is installed with the saddle stitcher attached.
!
Detail
Generally, a multiple of 4 original pages is required with a single-sided original, and a multiple of 2
original pages is required with a double-sided original. If there are not enough pages, blank pages are
automatically added at the end.
For details on stapling, refer to "Binding copies at the center ("Center Staple" and "Half-Fold"
setting/"Center Staple & Fold" setting)" on page 3-85.
For an original that exceeds 100 pages, refer to "Scanning the original in separate batches ("Separate
Scan" setting)" on page 3-11.
The width of the binding margin is automatically specified.
1
Position the original to be copied.
– For details on positioning the original, refer to "Feeding the original" on page 3-8.
2
Touch [Application], and then touch [Booklet].
– To cancel changes to the settings for all Application functions, press the [Reset] key. All changes to
the settings are canceled.
8-74
"Left Bind" setting
"Right Bind" setting
Application functions
bizhub C353/C253/C203 (FE2)