Display Stamping - Bosch VIP X1 Installation And Operating Manual

VIP X1/VIP X2 | Installation and Operating Manual
Camera 1 / Camera 2:
Enter a unique, unambiguous name for the camera in this field.

Display stamping

Various overlays or "stamps" in the video image provide important
supplementary information. These overlays can be enabled individually and
arranged on the image in a clear manner.
Note
The settings on this page apply to both camera inputs (VIP X2).
Camera name stamping:
This field sets the position of the camera name overlay. It can be displayed at
the Top, at the Bottom or at a position of your choice using the Custom option.
Or it can be set to Off if no overlay of this information is to be shown.
Time stamping:
This field sets the position of the time and date overlay. It can be displayed at a
position of your choice using the Custom option. Or it can be set to Off if no
overlay of this information is to be shown.
Alarm mode stamping:
Choose On if a text message should be overlaid in the event of an alarm. It can
be displayed at a position of your choice using the Custom option. Or it can be
set to Off if no overlay of this information is to be shown.
– Select the desired position from the lists.
– If you have selected the Custom option, additional fields are displayed to
specify the exact position (Position (XY):).
Bosch Security Systems | 2005-10 | V1.5
EN | 53
Configuration using a Web Browser