EN | 39
VIP X1/VIP X2 | Installation and Operating Manual
Alarm settings
Here, you can make the settings for the alarm sources and alarm connections.
Alarm sources
You can configure the possible alarm triggers for the VIP X (for example the
alarm inputs).
Alarm input 1 ... Alarm input 4:
Select the option On in order to activate the alarm via the corresponding external
alarm sensor. Otherwise, select Off.
Select Active high if the alarm is to be triggered by closing the contact. Select
Active low if the alarm is to be triggered by opening the contact.
Name:
You can enter a name for each alarm input, which is then displayed below the
icon for the alarm input on the LIVEPAGE during configuration (see Livepage
configuration, page 82).
Video loss alarm:
Click the check box if you want interruption of the video signal to trigger an
alarm. A selected video input is marked with a tick.
Bosch Security Systems | 2005-10 | V1.5
Configuration using a Web Browser