Bosch VIP X1 Installation And Operating Manual page 46

EN | 46
COM1 settings
You can configure the parameters of the RS232/485 serial interface to meet
your requirements.
Note
If the VIP X is working in multicast mode (see page 44), the first remote
location to establish a video connection to the unit is also assigned the
transparent data connection. However after about 15 seconds of inactivity,
the data connection is automatically terminated and another remote
location can exchange transparent data with the unit.
Serial port function:
Select a controllable device from the list. If you want to use the interface to
transmit transparent data, select Transparent. To operate the unit with a
terminal, choose Terminal.
Note
After selecting a device, the remaining parameters in the window are set
automatically and should not be changed.
Camera ID:
If necessary, enter the ID of the peripheral device you wish to control here (for
example a dome camera or pan/tilt head).
Configuration using a Web Browser
Installation and Operating Manual | VIP X1/VIP X2
Bosch Security Systems | 2005-10 | V1.5