Bosch VIP X1 Installation And Operating Manual page 86

EN | 86
If the operating status LED lights up red, the upload has failed and must be
repeated. To perform the upload, you must switch to a special page:
– In the address bar of your browser, after the unit IP address enter
/main.htm ein (for example 192.168.0.111/main.htm).
– Repeat the upload.
Configuration download:
You can save configuration data for the VIP X to a computer and load saved
configuration data from a computer to the unit.
– Click Download. A dialog will appear.
– Follow the instructions to save the current settings.
Configuration upload:
– Enter the full path of the file to upload or click Browse... to select the desired
file.
– Make certain that the file to be loaded comes from the same device type as
the unit you want to reconfigure.
– Click Upload to begin transmission to the unit. The progress bar allows you
to monitor the transfer.
Once the upload is complete, the new configuration is activated. The time
remaining is shown by the message going to reset Reconnecting in ...
seconds. After the upload is completed successfully, the unit will restart
automatically.
Configuration using a Web Browser
Installation and Operating Manual | VIP X1/VIP X2
Bosch Security Systems | 2005-10 | V1.5