Bosch VIP X1 Installation And Operating Manual page 75

VIP X1/VIP X2 | Installation and Operating Manual
COM1
You can configure the parameters of the RS232/485 serial interface to meet
your requirements.
Note
If the VIP X is working in multicast mode (see page 44), the first remote
location to establish a video connection to the unit is also assigned the
transparent data connection. However after about 15 seconds of inactivity,
the data connection is automatically terminated and another remote
location can exchange transparent data with the unit.
Serial port function:
Select a controllable device from the list. If you want to use the interface to
transmit transparent data, select Transparent. To operate the unit with a
terminal, choose Terminal.
Note
After selecting a device, the remaining parameters in the window are set
automatically and should not be changed.
Camera ID:
If necessary, enter the ID of the peripheral device you wish to control here (for
example a dome camera or pan/tilt head).
Note
If you are using a Bosch AutoDome, remember that the value of the
Camera ID must always be selected 1 less than the Bosch camera number
(for example: Bosch camera number: 1, Camera ID: 0).
Bosch Security Systems | 2005-10 | V1.5
EN | 75
Configuration using a Web Browser