Establishing The Connection - Bosch VIP X1 Installation And Operating Manual

EN | 26
– Follow the on-screen instructions.

Establishing the connection

The VIP X must be assigned a valid IP address to operate on your network.
The following default addresses have been pre-set at the factory: 192.168.0.1
– Start the Web browser.
– Enter the IP address of the VIP X as the URL. The connection will be
established and, after a short time, the LIVEPAGE with the video image will
appear.
Note
Depending on whether you are using a VIP X1 or a VIP X2, the screen
display may differ slightly from that shown above.
If the connection is not established, the maximum number of possible
connections may already have been reached. The maximum number of
connections depends on the device and network configuration.
Configuration using a Web Browser
Installation and Operating Manual | VIP X1/VIP X2
Bosch Security Systems | 2005-10 | V1.5