Bosch VIP X1 Installation And Operating Manual page 90

EN | 90
Establishing the connection
The VIP X must be assigned a valid IP address to operate on your network.
The following default addresses have been pre-set at the factory: 192.168.0.1
– Start the Web browser.
– Enter the IP address of the VIP X as the URL. The connection will be
established and, after a short time, the LIVEPAGE with the video image will
appear.
Note
Depending on whether you are using a VIP X1 or a VIP X2, the screen
display may differ slightly from that shown above.
Operation
Installation and Operating Manual | VIP X1/VIP X2
Bosch Security Systems | 2005-10 | V1.5