Installing in a Switch Cabinet Connections Power On/Power Off Maintenance and Upgrades Testing the Network Connection Unit Reset Repairs Transfer and Disposal Appendix Troubleshooting LEDs Specifications VIP X1600 XF Base Bosch Security Systems Installation and Operating Manual F.01U.082.088 | V3.5 | 2008.05...
Intended Use The VIP X1600 XF network video server is intended for use with CCTV systems and serves to transfer video and control signals via data networks (Ethernet LAN and Internet). The optional modules for installation determine the range of functions. Encoder modules (senders) and decoder modules (receivers) are available.
For exact identification, the model name and serial number are inscribed on the rating plate on the bottom of the VIP X1600 XF base and on the rating plates on the circuit boards of the modules. Please make a note of this information before installation, if necessary, so as to have it to hand in case of questions or when ordering spare parts.
Never open the housing of a VIP X1600 XF base. The unit does not contain any user- serviceable parts. Remove only the supplied cover when installing a module. – Do not change any components in a VIP X1600 XF base or a module. The units do not contain any user-serviceable parts. –...
Page 8
| Safety Information VIP X1600 XF F.01U.082.088 | V3.5 | 2008.05 Installation and Operating Manual Bosch Security Systems...
Security Systems if you detect any damage. System Requirements for Setup There are no additional requirements to be met for setting up the VIP X1600 XF base after installation is complete. Requirements for setting up the installed modules can be found in the module manuals.
3.4.1 Network Video Server Housing The VIP X1600 XF base is a special housing for the installation of up to four standalone modules. Encoder modules (senders), for the connection of up to four cameras each, and decoder modules (receivers), for the connection of up to four monitors each, are available.
SFP LED lights up yellow when the unit is connected via SFP LEDs, status information for the modules and the VIP X1600 XF base NOTICE! For more information about the LEDs, see Section 6.2 LEDs, page 21.
Installation Preparations The VIP X1600 XF base is designed for installation in a switch cabinet. Mounting the unit in a 19-inch rack using the installation material supplied is a quick and easy operation. It is also possible to operate this as a desktop unit. The four elastic bumpers included in the scope of delivery ensure a non-slip support.
Installing in a Switch Cabinet 4.3.1 Preparations The VIP X1600 XF is set up for installation in a 19-inch rack. The necessary installation equipment is included in the scope of delivery. CAUTION! When installing in a switch cabinet, ensure that there is sufficient ventilation for the unit.
Page 15
VIP X1600 XF Installation | en Bosch Security Systems Installation and Operating Manual F.01U.082.088 | V3.5 | 2008.05...
4.4.2 Direct iSCSI Connection You can connect the VIP X1600 XF directly to an iSCSI system via a free ETH1, ETH2 or ETH3 interface. This connection is an alternative to using the Ethernet interfaces as a redundant network connection. Use a UTP category 5 network cable with RJ45 plugs for a direct connection to an iSCSI system.
Connect the VIP X1600 XF to a power supply unit and plug this into the mains. The unit is now ready for use. The VIP X1600 XF does not come supplied with a power supply unit.
Transfer and Disposal The VIP X1600 XF, the VIP X1600 XF base or a module should only be passed on together with this Installation and Operating Manual. Your Bosch product is designed and manufactured with high-quality materials and components which can be recycled and reused.
LEDs The VIP X1600 XF network video server is equipped with a number of LEDs that show the operating status and can give indications of possible malfunctions: 6.2.1...
VIP X1600 XF Specifications | en Specifications VIP X1600 XF Base Operating voltage 12 V DC, redundant Power consumption 49.2 W with full equipment LAN interfaces 3 × Ethernet 10/100/1000 Base-T, automatic adjustment, half/full duplex, RJ45 SFP slot 1 × 1 Gbps, for mini-GBIC modules Displays 5 ×...