Bosch VIP X1 Installation And Operating Manual page 30

EN | 30
Encoder settings
For encoding the video signal, you can select two profiles for each encoder
(video input) and change the presets for the profiles.
Selecting a profile
You can adapt the MPEG-4 data transmission to the operating environment (for
example network structure, bandwidth, data structures). To do this, the VIP X
simultaneously generates two data streams (Dual Streaming) for each video
input, for which you can select different compression settings, for example one
setting for transmissions to the Internet and one for LAN connections.
Note
The settings must be made individually for each camera input and each
stream. The designations Video 1 and Video 2 on the VIP X2 corresponds
to the labeling of the video inputs on the actual unit.
Pre-programmed profiles are available, each giving priority to different
perspectives.
Profile 1: Low bandwidth (CIF)
High quality for low bandwidth connections,
resolution 352 × 288/240 pixels
Profile 2: Low delay (1/2 D1)
High quality with low delay,
resolution 352 × 576/480 pixels
Profile 3: High resolution (D1/4CIF)
High resolution for high bandwidth connections,
resolution 704 × 576/480 pixels
Configuration using a Web Browser
Installation and Operating Manual | VIP X1/VIP X2
Bosch Security Systems | 2005-10 | V1.5